Replace Power
Replace Power power supply for HP Pavilion 510-P030
ATX power supply with 20+4 pin, 12V 4-pin, three SATA and one 6-pin connector for HP Pavilion 510-P030 DT PC
- ColorGrey
- TypeATX
- Fans1
- Weight1
- Replacement upgrade for HP Pavilion 510-P030
- Single fan provides active cooling
- 20+4 pin ATX connector fits motherboard
- +12 V 4-pin connector powers CPU
- Three SATA connectors support storage drives
Replacement PSU for HP Pavilion 510-P030
This Replace Power ATX unit is built as a direct swap for the HP Pavilion 510-P030 desktop. It delivers the standard 20+4 pin ATX connector, a +12V 4-pin CPU plug, three SATA power leads and one 6-pin connector for a graphics card. The grey chassis holds a single fan and weighs 1 kg.
Upgrading from a failed or undersized factory unit
If the original supply has died or cannot feed a new GPU, this replacement restores reliable power with the exact connector mix the motherboard expects. The jump is worth it when the system refuses to boot, shuts down under load or when a discrete card needs the 6-pin lead the old PSU lacked.
Straightforward ATX swap with fixed cables
Installation follows the usual ATX routine: unplug the old unit, remove four screws, fit the new one and reconnect the keyed plugs. The fixed cable set means no modular wiring errors, but builders who need more SATA ports or a second 6-pin lead will find the harness limiting.
Points forts
- Replacement upgrade for HP Pavilion 510-P030
- Single fan provides active cooling
- 20+4 pin ATX connector fits motherboard
- +12 V 4-pin connector powers CPU
- Three SATA connectors support storage drives
Caractéristiques
| Brand | Replace Power |
|---|---|
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 1 |
Questions sur cet article
Will the 20+4 pin ATX connector and the +12V 4-pin power connector reach the motherboard headers in an HP Pavilion 510-P030 case?
The unit supplies a standard 20+4 pin ATX connector and a +12V 4-pin power connector, both sized for ATX motherboards used in the Pavilion 510-P030 chassis.
Do I need to remove the existing power supply bracket before sliding this unit into the Pavilion 510-P030?
Yes, unscrew the original PSU bracket from the chassis, then slide the replacement unit in and secure it with the same screws.
How many SATA drives can I power later if I add more storage?
The power supply provides three SATA connectors, so up to three SATA drives can be powered simultaneously.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
Silverstone Decathlon R Gold 750W ATX 3.0 power supply
Silverstone Technology FA311-B FARA 311 Micro-ATX PC case
- Micro ATX



