Replace Power
Replace Power RPMPS3420-5 ATX Power Supply 20+4Pin
ATX power supply with 20+4-pin connector and single 12V rail for Dell Dimension 3000, 3100, 4400, 4550, 4600, 8200, E310 and E510 desktops
- TypeATX
- Fans1
- Weight0.1
- Direct replacement for Dell Dimension desktops
- 20+4 pin connector fits 20-pin and 24-pin boards
- Single +12 V rail delivers 16 A for stable power
- Over-voltage protection guards components
- 115/230 V input with 50/60 Hz range works worldwide
Replacement PSU for Dell Dimension
The Replace Power RPMPS3420-5 is an ATX power supply built to replace the original unit in Dell Dimension 3000, 3100, 4400, 4550, 4600, 8200, E310 and E510 desktops. It uses a 20+4 pin main connector that fits both 20-pin and 24-pin motherboard sockets. A single fan cools the unit.
Owners of listed Dell systems needing a direct swap
This supply suits owners of the named Dell Dimension models who need a like-for-like replacement when the original unit fails. Builders working on custom chassis, non-Dell motherboards or any platform requiring auxiliary PCIe power connectors should look elsewhere.
Single +12 V rail rated at 16 A
The +12 V rail delivers 16 A, which determines whether the unit can support the graphics card or drives in the target system. Combined 3.3 V and 5 V rails provide 13 A each, while the 5 V standby line supplies 2.5 A.
Points forts
- Direct replacement for Dell Dimension desktops
- 20+4 pin connector fits 20-pin and 24-pin boards
- Single +12 V rail delivers 16 A for stable power
- Over-voltage protection guards components
- 115/230 V input with 50/60 Hz range works worldwide
Caractéristiques
| Brand | Replace Power |
|---|---|
| Model | RPMPS3420-5 |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
Questions sur cet article
How do I install the 20+4Pin main connector and what step is often missed?
Align the 20+4Pin connector with the motherboard socket, press firmly until the latch clicks, and ensure the extra 4-pin section is fully seated on 24-pin boards.
What maintenance or replacement will the single fan need later?
The single fan should be cleaned of dust periodically; if bearing noise appears or airflow drops, replace the entire PSU as the fan is not user-serviceable.
What limit appears first under sustained load on the +12V rail?
The +12V rail is rated at 16A; continuous draw near that level will hit the single-rail current limit before thermal protection triggers.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



