Replace Power
Replace Power RPSU-C99-64 420W ATX power supply
420W ATX power supply with 20+4 pin, SATA, and peripheral connectors for eMachines T5046, T5048, T5052, T5042, T5062, T5082 desktops
- ColorGrey
- TypeATX
- Fans1
- Weight0.1
- Direct replacement for eMachines T5046 T5048 T5052 T5042 T5062 T5082 systems
- 420W output supports typical desktop workloads
- 20+4 pin ATX connector fits 20-pin and 24-pin motherboards
- One SATA power connector for modern storage drives
- Switchable 110V/220V input suits global mains voltage
Replacement PSU for eMachines T5046
This 420W ATX power supply replaces the original unit in eMachines T5046 T5048 T5052 T5042 T5062 T5082 desktops. It fits the standard ATX form factor and uses a single 80mm fan for cooling. The grey enclosure houses a switchable 110V 220V input for worldwide mains compatibility.
Who should buy this
Owners of the listed eMachines models who need a direct replacement for a failed or noisy power supply will find the correct connectors and mounting points. Builders working on modern ATX systems that require PCIe power cables or higher wattage should look elsewhere.
Connector complement decides fit
The loom provides one SATA connector one 20+4 pin ATX connector one 12V ATX connector two large peripheral connectors two short peripheral connectors and one small peripheral connector. If your build needs additional SATA or PCIe leads this unit will not support it.
Points forts
- Direct replacement for eMachines T5046 T5048 T5052 T5042 T5062 T5082 systems
- 420W output supports typical desktop workloads
- 20+4 pin ATX connector fits 20-pin and 24-pin motherboards
- One SATA power connector for modern storage drives
- Switchable 110V/220V input suits global mains voltage
Caractéristiques
| Brand | Replace Power |
|---|---|
| Model | RPSU-C99-64 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
Questions sur cet article
Will the 15-inch SATA connector reach drives in my older eMachines T5048 case?
The single SATA lead is 15 inches long, matching the original routing in T5046, T5048, T5052, T5042, T5062 and T5082 chassis.
How do I confirm the 80 mm fan is spinning correctly after install?
Power the system on; the 80 mm fan should start immediately and run continuously while the supply is live.
Does the box include the 20+4 pin ATX and 12 V ATX cables or must I buy them?
Both the 14-inch 20+4 pin ATX cable and the 14-inch 12 V ATX cable are permanently attached to the unit.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



