Replace Power
Replace Power RPSU-PS-001B power supply 300W ATX
ATX power supply delivers 300 W with one 20+4-pin motherboard connector, one 4-pin CPU connector, three peripheral connectors, one floppy connector and three SATA power connectors
- TypeATX
- Fans1
- Weight2
- Delivers 300W for stable system operation
- 20+4-pin ATX connector fits most modern motherboards
- 4-pin ATX12V connector powers CPU reliably
- Three SATA connectors support multiple drives
- Over-voltage protection safeguards components
Replacement PSU for Dell Optiplex GX520 GX620
This 300W ATX power supply replaces the original CPB09-001B unit in Dell Optiplex GX520 and GX620 desktops. It fits the standard ATX form factor and includes a single fan for cooling. The unit weighs 2 units and is supplied new.
Connector mix matches legacy Dell builds
The harness provides one 20+4-pin ATX connector, one 4-pin ATX12V connector, three peripheral connectors, one floppy connector and three SATA connectors. This exact combination covers the motherboard, CPU and drive power needs of the target Optiplex models.
Direct swap with no cable adapters needed
Installation is a straight removal of the old unit and insertion of this replacement using the existing mounting points. The only common issue is the short floppy lead, which can be left disconnected if the system has no floppy drive.
Points forts
- Delivers 300W for stable system operation
- 20+4-pin ATX connector fits most modern motherboards
- 4-pin ATX12V connector powers CPU reliably
- Three SATA connectors support multiple drives
- Over-voltage protection safeguards components
Caractéristiques
| Brand | Replace Power |
|---|---|
| Model | RPSU-PS-001B |
| Type | ATX |
| Fans | 1 |
| Weight | 2 |
Questions sur cet article
How much power does the 300W unit actually deliver to a Dell Optiplex GX520 or GX620?
It supplies up to 300W through a 20+4-pin ATX connector, a 4-pin ATX12V connector, three peripheral connectors, one floppy connector and three SATA connectors, matching the original CPB09-001B specification.
What does the ATX form factor limit when installing this PSU?
The ATX layout fixes the mounting hole pattern and the 20+4-pin and 4-pin ATX12V connector positions, so it fits standard ATX cases and motherboards that accept those plugs.
What clearance is needed for the single fan and the unit's weight?
The 2 kg unit uses one internal fan; allow standard ATX depth and rear ventilation space so the fan can exhaust heat without obstruction.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



