RIMLANCE
RIMLANCE RUD12800LS8C4 4GB DDR3 1600 CL11 1.35V UDIMM 1Rx8 Desktop RAM
4GB DDR3 1600 CL11 1.35V UDIMM module with 1Rx8 chip layout for desktop upgrades
- Capacity4GB
- SpeedDDR3 1600 (PC3 12800)
- CAS LatencyCL11
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor Brand Chipset
- 4GB capacity adds multitasking headroom for everyday desktop workloads
- DDR3 1600 PC3-12800 speed delivers responsive data throughput
- Low 1.35V operation reduces power draw and heat output
- CL11 latency keeps access times tight for smooth operation
- 1Rx8 unbuffered UDIMM fits standard desktop DIMM slots
Single 4 GB DDR3 1600 UDIMM
This 4 GB unbuffered DDR3 module runs at 1600 MT/s with CL11 latency and 1.35 V operation. It targets owners of older desktop platforms that still use DDR3 memory and need a modest capacity increase for everyday multitasking.
Standard 240-pin DIMM installation
The stick inserts into any desktop DDR3 slot keyed for 1.35 V or 1.5 V operation; the system will train at the highest mutually supported speed. Problems usually appear when mixing kits with different densities or timings, which can prevent the board from posting.
4 GB single-rank capacity
The 1Rx8 layout provides 4 GB of addressable memory, enough for light office work, web browsing and older games. Headroom disappears quickly with modern browsers, virtual machines or large media files, so systems that regularly exceed 4 GB in use will see swapping and slowdown.
Points forts
- 4GB capacity adds multitasking headroom for everyday desktop workloads
- DDR3 1600 PC3-12800 speed delivers responsive data throughput
- Low 1.35V operation reduces power draw and heat output
- CL11 latency keeps access times tight for smooth operation
- 1Rx8 unbuffered UDIMM fits standard desktop DIMM slots
Caractéristiques
| Brand | RIMLANCE |
|---|---|
| Model | RUD12800LS8C4 |
| Capacity | 4GB |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
Questions sur cet article
Will this 1.35 V DDR3 module work in a motherboard that only supports 1.5 V memory?
The module is rated at 1.35 V; many DDR3 boards accept both voltages, but you should check the motherboard manual or CPU memory-controller specification to confirm 1.35 V support before buying.
My system has two slots — can I add this 4 GB stick alongside an existing 4 GB module for dual-channel?
Yes, if the existing stick is also DDR3 1600 CL11 1.35 V unbuffered non-ECC, the pair will run in dual-channel; mismatched speed, latency or voltage will force the system to the slowest common settings.
Does the 1Rx8 (dual-rank) organisation affect compatibility with my CPU’s memory controller?
Dual-rank 1Rx8 modules are standard for consumer DDR3; most desktop memory controllers support them without issue, but verify the maximum rank-per-channel limit in your CPU or motherboard documentation.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



