SAMA
SAMA HAT-1000yzB2G 1000W ATX 3.1 power supply
Fully modular 1000 W ATX 3.1 power supply with Cybenetics Gold efficiency, 12VHPWR 16-pin connector for RTX 40 and 50 series, 140 mm FDB fan and Japanese capacitors in a compact 150 mm depth
- TypeATX 3.1 Compatible
- Maximum Power1000 W
- ModularYes
- Fans1 x 140 mm
- PFCActive
- Main Connector24Pin
Option G1000W White
- Cybenetics Gold certification delivers over 90% efficiency with minimal noise
- ATX 3.1 and PCIe 5.1 ready with 12VHPWR 16-pin connector for up to 600W GPU power
- Fully modular cabling lets you connect only the cables needed for a clean build
- 140 mm FDB fan runs silently under 40% load in ECO mode
- 100% Japanese capacitors ensure stable power delivery and long-term durability
1000W ATX 3.1 power supply
The SAMA HAT-1000yzB2G delivers 1000W of continuous power through an ATX 3.1 compliant design. It targets high-performance gaming PCs and content creation workstations that demand stable, efficient energy delivery. Fully modular cabling keeps builds clean and airflow unobstructed. A 140mm FDB fan with ECO mode stays silent under light loads.
Upgrade from older ATX units
This unit replaces power supplies lacking the 12V-2x6 16pin connector required by modern RTX graphics cards. The jump is worth it when your GPU draws up to 600W through that single connector and you need Cybenetics Gold efficiency above 90%. Active PFC and a single +12V rail simplify the transition. Hold-up time exceeds 12ms at full load for ride-through protection.
Ideal for compact, quiet high-end builds
The 150mm depth fits most cases including small form factor chassis, suiting builders who prioritise low noise and Japanese capacitor reliability. It suits systems running RTX 40 or 50 series cards within the 1000W envelope. Users needing more than three 6+2-pin PCIe connectors or additional SATA power ports should look at something else.
Points forts
- Cybenetics Gold certification delivers over 90% efficiency with minimal noise
- ATX 3.1 and PCIe 5.1 ready with 12VHPWR 16-pin connector for up to 600W GPU power
- Fully modular cabling lets you connect only the cables needed for a clean build
- 140 mm FDB fan runs silently under 40% load in ECO mode
- 100% Japanese capacitors ensure stable power delivery and long-term durability
Caractéristiques
| Brand | SAMA |
|---|---|
| Model | HAT-1000yzB2G |
| Series | G-Series |
| Part Number | G1000-WHGFF001-US |
| Type | ATX 3.1 Compatible |
| Maximum Power | 1000 W |
| Modular | Yes |
| Fans | 1 x 140 mm |
| PFC | Active |
| Main Connector | 24Pin |
| +12V Rails | Single |
| PCI-Express Connector | 3 x 6+2-Pin |
| SATA Power Connector | 2 |
| Hold-up Time | > 12 ms @ 100% load |
| Efficiency | > 90% |
| Over Voltage Protection | Yes |
| Overload Protection | Yes |
| Input Voltage | 100 - 240 V |
| Output | 1000W |
| MTBF | >100,000 Hours |
| Connectors | 1 x 24 pin ATX |
| Color | White |
| Max PSU Length | 150 mm |
| Cable Spec | 1x MB ATX 24Pin 550mm 2x CPU (4+4)Pin 700mm 3x PCI-E (6+2)Pin 600mm 1x 12V-2x6 (12+4)Pin 600mm 2x (SATA+SATA+SATA+SATA) 450+150+150+150mm 1x (Molex+Molex+Molex+Molex) 450+150+150+150mm |
| Energy-Efficient | Cybenetics Certified |
| Top Fans Size | 140mm |
| Top Fans Bearing Type | Fluid Dynamic Bearing |
| Poids d’expédition | 2.56 kg |
| Dimensions du colis | 267 × 203 × 114 mm |
Autres versions de ce modèle
5 de plus dans cette gamme
Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.
SAMA HAT-650yzB1G 650 W ATX 3.1 power supply
- ATX 3.1 Compatible
- 650 W
SAMA HAT-650yzB1G 650W ATX 3.1 power supply
- ATX 3.1 Compatible
- 650 W
SAMA HAT-750yzB1G 750 W ATX 3.1 power supply
- ATX 3.1 Compatible
- 750 W
SAMA HAT-750yzB1G 750W ATX 3.1 power supply
- ATX 3.1 Compatible
- 750 W
Questions sur cet article
What case clearance is needed for the 150 mm deep PSU?
The unit is 150 mm deep so it fits most standard ATX cases including compact builds; measure from the rear panel to any drive cage or motherboard tray to confirm at least 150 mm of free space.
How do I connect the 12VHPWR 16 pin cable for an RTX 40 or 50 series card and what step is often missed?
Plug the supplied 12VHPWR 16 pin cable directly into the PSU’s native 12V-2x6 port and seat it fully until the latch clicks; the common mistake is leaving a 1 mm gap which can cause melting.
When should the 140 mm FDB fan be cleaned and how?
Clean the fan intake every 6 to 12 months with short bursts of compressed air while holding the blades still; the fluid-dynamic bearing is sealed and does not need lubrication.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
Micron Technology, Inc. MT4JTF12864AZ-1G4D1 1GB DDR3 1333 Desktop RAM
- 1GB
- DDR3 1333 (PC3 1060…
Kingston Technology Corp. KTD-DM8400A/512 512MB DDR2 desktop RAM
- 512MB
- CL4








