Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter

Seagate

Seagate Savvio 10K.4 ST9600204SS 600GB 10000 RPM SAS 6Gb/s 2.5" internal hard drive

SKU CH-TXC2-M2HH7 MPN ST9600204SS

A 2.5-inch SAS hard drive spinning at 10000 RPM with 600GB capacity, 3.89ms seek time and 0.44 percent AFR for server workloads

  • PackagingBare Drive
  • InterfaceSAS 6Gb/s
  • Capacity600GB
  • Average Seek Time3.89ms
  • Average Write Time4.54ms
  • Average Latency3ms
  • 10,000 RPM SAS interface accelerates server workloads
  • 600 GB capacity fits dense 2.5" bays
  • 89 ms average seek cuts latency
  • 44 % AFR with 2 M-hour MTBF boosts reliability
  • Low power draw reduces cooling and energy costs

600 GB 10K SAS Enterprise Drive

The Seagate Savvio 10K.4 ST9600204SS is a 600 GB 2.5 inch internal hard drive spinning at 10000 RPM with a SAS 6Gb/s interface. It is built for enterprise server environments where consistent throughput and high reliability matter. The bare-drive form factor measures 9.5 mm in height and fits standard 2.5 inch bays.

Suited for Server Workloads

This drive suits administrators deploying storage arrays or replacing failed units in compatible SAS backplanes that demand 10K speeds and a 2M-hour MTBF rating. Buyers who need a different capacity or a non-SAS interface should look at other models. The 3.89 ms average seek time and 3 ms latency support random-access server tasks.

SAS 6Gb/s Interface Decides Compatibility

The single specification that decides fit is the SAS 6Gb/s interface; the drive will only operate in controllers and backplanes that support this protocol. Verify that your server or storage chassis accepts 2.5 inch SAS drives with a 9.5 mm z-height before purchase. No other interface or protocol is supported by this model.

Points forts

  • 10,000 RPM SAS interface accelerates server workloads
  • 600 GB capacity fits dense 2.5" bays
  • 89 ms average seek cuts latency
  • 44 % AFR with 2 M-hour MTBF boosts reliability
  • Low power draw reduces cooling and energy costs

Caractéristiques

BrandSeagate
SeriesSavvio 10K.4
ModelST9600204SS
PackagingBare Drive
InterfaceSAS 6Gb/s
Capacity600GB
Average Seek Time3.89ms
Average Write Time4.54ms
Average Latency3ms
RPM10000 RPM
Features20 percent higher reliability than any other drive available and the industry’s first 2M-hour MTBF drive to provide 0.44 percent AFR
SFF and low power consumption reduce end-user cooling and energy costs
UsageIdeal for Servers
Form Factor2.5"
Height (maximum)9.5mm
Width (maximum)69.75mm
Length (maximum)100.3mm
Poids d’expédition0.54 kg
Dimensions du colis152 × 95 × 25 mm

Questions sur cet article

How do I install this 2.5-inch SAS drive in a server bay, and what step is often missed?

Mount the 9.5mm-high drive in a 2.5-inch SAS hot-swap tray, then secure the SFF connector; the step often missed is verifying the backplane supports SAS 6Gb/s before cabling.

What maintenance or replacement will this ST9600204SS need later?

Enterprise drives like this 10000 RPM unit have a 2M-hour MTBF and 0.44 percent AFR; plan replacement when SMART reallocated-sector counts rise or after the rated service life.

What limit appears first during sustained writes on this 600GB Savvio?

The 10000 RPM spindle caps sequential throughput, so sustained write latency settles around 4.54ms average before the SAS 6Gb/s bus saturates.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.