segotep
segotep 1800W power supply
Delivers 1800 W through ten 6-pin connectors with active PFC across 100–264 V input and 95 % efficiency
- Maximum Power1800 W
- Fans60*60mm high speed fan
- Delivers 1800W for up to 8 high-end graphics cards
- Active PFC accepts 100–264V input for stable operation worldwide
- 95% conversion efficiency reduces electricity costs compared to passive PFC
- 10 PCIe 6-pin connectors on 38cm cables simplify multi-GPU builds
- Automatic over-voltage, over-current and short-circuit protection safeguards mining hardware
Professional Mining Power
This 1800 W unit is built for cryptocurrency mining rigs that demand continuous high-current delivery. It accepts 100–264 V AC input and provides a single +12.4 V rail rated at 145.2 A, making it suitable for dense GPU or ASIC deployments.
Compact Build With High Airflow
A 60×60 mm high-speed fan moves 15000±10 % airflow at 86 dBA to handle the thermal load in a 22×10.5×6.5 cm chassis. Active PFC allows operation down to 100 V, while over-voltage, over-current and short-circuit protections shut the unit down automatically during faults.
Ten PCIe Connectors And Long Leads
Ten 6-pin PCIe connectors on 38 cm cables support up to eight high-end graphics cards. A thickened pure-copper AC power cord measuring 4.6 ft reduces resistive losses, and the conversion efficiency reaches 95 % or higher to lower electricity costs.
Points forts
- Delivers 1800W for up to 8 high-end graphics cards
- Active PFC accepts 100–264V input for stable operation worldwide
- 95% conversion efficiency reduces electricity costs compared to passive PFC
- 10 PCIe 6-pin connectors on 38cm cables simplify multi-GPU builds
- Automatic over-voltage, over-current and short-circuit protection safeguards mining hardware
Caractéristiques
| Brand | Segotep |
|---|---|
| Maximum Power | 1800 W |
| Fans | 60*60mm high speed fan |
Questions sur cet article
What input voltage range does the active PFC circuit support?
The active PFC circuit accepts 100 to 264 Vrms, so the unit operates on both 110 V and 230 V mains without a voltage selector switch.
What are the exact dimensions of the 2U chassis?
The enclosure measures 22 cm long, 10.5 cm wide and 6.5 cm high, fitting a standard 2U rack slot.
How do I connect the ten 6-pin PCIe cables without overloading a single rail?
Each of the ten 6-pin connectors draws from the single +12.4 V rail rated at 145.2 A; distribute the eight GPU loads evenly across all ten cables and verify each connector is fully seated before powering on.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



