Silverstone Technology
Silverstone Technology SST-ST1300-TI 1300W ATX power supply
ATX power supply delivering 1300W continuous output with 80 PLUS Titanium efficiency, fully modular cables, a single +12V rail rated at 1296W.
- TypeATX Mid Tower
- With Power Supply1300W
- 80 PLUS Titanium efficiency reaches 94% at typical loads
- Single +12V rail delivers 1296W combined output
- 100% modular cables simplify installation and airflow
- 135mm fan runs semi-fanless for 0 dBA at low load
- Japanese capacitors rated for 100000 hours MTBF
1300W ATX power supply
The Silverstone Technology SST-ST1300-TI delivers 1300W continuous DC output with a peak rating of 1400W. It targets builders assembling high-end workstations or multi-GPU systems that demand sustained 24/7 operation at up to 50°C ambient temperature. The fully modular design keeps cable routing clean in ATX mid-tower cases.
Single +12V rail with 1296W combined output
A class-leading single +12V rail supplies up to 1296W, while the combined +3.3V and +5V rails are rated at 120W. Voltage regulation stays within ±3% with low ripple and noise across the load range. Efficiency reaches 90% to 94% from 10% to 100% loading, backed by 80 PLUS Titanium certification and all Japanese electrolytic capacitors.
135mm semi-fanless cooling and modular connectors
A 135mm fan runs silently between 0 and 36 dBA and features intelligent semi-fanless operation at low loads. The package includes dual EPS 8-pin cables and multiple PCI-E 8/6-pin connectors for modern graphics cards. A 4-pin sense wire on the motherboard connector must be attached to the modular interface for proper function.
Points forts
- 80 PLUS Titanium efficiency reaches 94% at typical loads
- Single +12V rail delivers 1296W combined output
- 100% modular cables simplify installation and airflow
- 135mm fan runs semi-fanless for 0 dBA at low load
- Japanese capacitors rated for 100000 hours MTBF
Caractéristiques
| Type | ATX Mid Tower |
|---|---|
| With Power Supply | 1300W |
Questions sur cet article
Will the 135mm semi-fanless unit fit in an older chassis that only clears 150mm depth?
The housing is 180mm deep so it exceeds a 150mm limit; measure your case clearance before ordering.
How do I confirm the single +12V rail is delivering the rated 1296W combined output under load?
Use a multimeter on the 24-pin and EPS connectors; the rail should stay within ±3% of 12V while the fan remains below 36 dBA.
Which cables come pre-installed and which must be purchased separately for dual EPS and four PCI-E 8/6-pin devices?
All cables are modular in the box — two EPS 8-pin and four PCI-E 8/6-pin leads are included; no extra cables are required.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



