Silverstone
SilverStone XE04-SP5 Black Fan Shroud 4U CPU Cooler SP5 400W TDP
4U CPU cooler for AMD Epyc Socket SP5 up to 400W TDP with five 8mm heat-pipes and a 92mm PWM fan
- TypeCooler
- Cools AMD Epyc CPUs up to 400W TDP
- Five 8mm heat-pipes move heat into aluminum fins
- 92mm PWM dual ball-bearing fan rated 90000 hours MTTF
- Fan spins 1500-5000 rpm delivering 77.7 CFM at 10.67mmH2O
- Compact 93x128x118mm footprint fits 4U server chassis
Socket SP5 4U cooler for AMD Epyc
The SilverStone XE04-SP5 is a black fan shroud designed for 4U server and workstation chassis. It targets AMD Epyc processors on Socket SP5 with a thermal design power of up to 400W. Five Ø8mm heat pipes transfer heat into an aluminum fin stack for efficient dissipation. The unit ships new and is built for continuous operation in rack environments.
Verify SP5 socket and 4U height clearance
Confirm that the motherboard uses Socket SP5 and that the chassis provides at least 128mm of vertical clearance for the cooler height. The overall dimensions are 93mm wide by 128mm high by 118mm deep. Ensure the CPU TDP does not exceed 400W. The mounting hardware is specific to the SP5 retention mechanism; other sockets are not supported. No additional case or power-supply constraints are specified in the data.
Included 92mm PWM fan with dual ball bearing
A 92mm PWM fan is pre-installed, rated at 90,000 hours MTTF. Speed ranges from 1,500 to 5,000rpm, delivering up to 77.7 CFM and 10.67mmH2O static pressure at 43dBA and 0.66A. The fan plugs into a standard 4-pin header for automatic speed control. No extra brackets, thermal compound or software utilities are mentioned in the supplied information.
Points forts
- Cools AMD Epyc CPUs up to 400W TDP
- Five 8mm heat-pipes move heat into aluminum fins
- 92mm PWM dual ball-bearing fan rated 90000 hours MTTF
- Fan spins 1500-5000 rpm delivering 77.7 CFM at 10.67mmH2O
- Compact 93x128x118mm footprint fits 4U server chassis
Caractéristiques
| Type | Cooler |
|---|
Questions sur cet article
Does the XE04-SP5 ship with its own fan or must I source a 92mm PWM unit separately?
A 92mm PWM dual ball bearing fan is included in the box, rated at 1500-5000 rpm, 77.7 CFM, 10.67 mmH2O, 43 dBA and 0.66 A with an MTTF of 90000 hours, so no separate fan purchase is required.
How do I confirm this cooler fits my specific SP5 platform and 400W TDP ceiling?
The XE04-SP5 is designed for Socket SP5 AMD Epyc processors up to 400W TDP; verify your chassis allows 128mm height, 93mm width and 118mm depth clearance before ordering.
What does the 43 dBA figure mean when the cooler is mounted inside a 4U server?
At maximum 5000 rpm the fan produces 43 dBA; in a typical 4U chassis with system airflow the perceived noise is usually lower, and PWM control lets the fan run slower at lighter loads.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



