Simmtec, Inc
Simmtec, Inc 1GB DDR2 533MHz PC2-4200 PC2-4300 240-pin DIMM desktop RAM
1GB DDR2 desktop memory module running at 533MHz with PC2-4200 and PC2-4300 ratings, 240-pin unbuffered non-ECC DIMM at 1.8V
- Capacity1GB
- 1GB capacity boosts multitasking headroom
- 533MHz DDR2 speed matches PC2-4200 and PC2-4300 specs
- 240-pin DIMM fits standard desktop slots
- Non-ECC unbuffered design suits consumer boards
- 8V operation keeps power draw low
1GB DDR2 533MHz desktop module
This Simmtec DDR2 module provides 1GB of memory for desktop systems that use 240-pin DIMM slots. It runs at 533MHz and is rated for PC2-4200 and PC2-4300 standards. The stick is unbuffered, non-ECC and non-parity, making it a direct upgrade for compatible older platforms.
533MHz speed rating decides fit
The single specification that determines compatibility is the 533MHz DDR2 rating, shown as PC2-4200 and PC2-4300. A motherboard must support DDR2 at this frequency and accept 240-pin unbuffered DIMMs. If the board requires a different DDR2 speed, ECC, registered modules or a different voltage, this part will not work.
Fits 1.8V DDR2 boards with free slots
Installation requires a desktop motherboard with an available 240-pin DDR2 slot that operates at 1.8V. The module adds 1GB of capacity without needing extra power connectors, cooling or software configuration. It leaves other slots free for additional matched modules if the platform supports dual-channel operation.
Points forts
- 1GB capacity boosts multitasking headroom
- 533MHz DDR2 speed matches PC2-4200 and PC2-4300 specs
- 240-pin DIMM fits standard desktop slots
- Non-ECC unbuffered design suits consumer boards
- 8V operation keeps power draw low
Caractéristiques
| Capacity | 1GB |
|---|
Questions sur cet article
What does 533MHz mean for my desktop once this DIMM is installed?
The module runs at 533MHz DDR2, so the system sees a 533MHz data rate on the memory bus.
What does PC2-4200 and PC2-4300 tell me about bandwidth limits?
PC2-4200 and PC2-4300 are bandwidth labels for DDR2 533; the peak transfer rate is capped at the 533MHz clock.
Will this 240-pin DIMM fit my motherboard slot?
It uses the standard 240-pin DDR2 DIMM form factor, so it fits any desktop board with a DDR2 240-pin slot.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



