Simmtec, Inc
Simmtec, Inc 2GB 2x 1GB DDR2 PC2 6400 800Mhz 240 Pin DIMM desktop RAM
A 2 GB DDR2 desktop memory kit running at 800 MHz with 240-pin DIMM modules
- Capacity2GB (2 x 1GB)
- 2 GB dual-channel kit doubles usable memory capacity
- DDR2 PC2-6400 specification matches 800 MHz system bus speed
- 240-pin DIMM form factor fits standard desktop motherboard slots
- Two matched 1 GB modules enable dual-channel architecture benefits
- Grade-A components tested before shipment reduce crash risk
DDR2 PC2 6400 800Mhz desktop memory kit
This Simmtec kit supplies 2 GB of DDR2 memory as two matched 1 GB modules. The DIMMs use the 240 pin form factor and run at the PC2 6400 800Mhz data rate. They are built for older desktop platforms that accept this specification.
Suitable for legacy DDR2 systems
This memory suits owners of desktops that require DDR2 PC2 6400 modules in a 240 pin layout. It is not for systems that need a different DDR generation, a different pin count or a higher data rate than the rated 800Mhz.
240 pin DDR2 DIMM format
The decisive specification is the 240 pin DDR2 DIMM interface combined with the PC2 6400 800Mhz rating. If the motherboard calls for this exact pin count and speed grade the kit will fit; otherwise a different module type is required.
Points forts
- 2 GB dual-channel kit doubles usable memory capacity
- DDR2 PC2-6400 specification matches 800 MHz system bus speed
- 240-pin DIMM form factor fits standard desktop motherboard slots
- Two matched 1 GB modules enable dual-channel architecture benefits
- Grade-A components tested before shipment reduce crash risk
Caractéristiques
| Capacity | 2GB (2 x 1GB) |
|---|
Questions sur cet article
Should I pick the 2GB kit or look for a single 2GB module?
The kit supplies two matched 1GB sticks so the board can run in dual-channel mode, which doubles the data path compared with a single module.
What does the PC2 6400 label mean for actual throughput?
PC2 6400 rates the kit at a peak transfer of 6400 MB/s when the memory controller runs at the rated 800 MT/s.
Will the 240 pin DDR2 DIMM fit my motherboard slot?
Yes — 240 pin DDR2 DIMMs are keyed for desktop DDR2 sockets, so they install only in boards that accept DDR2 memory.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



