Simmtec, Inc
Simmtec, Inc 2GB DDR2 PC2-4200 533MHz 240-pin CL4 desktop RAM
2GB DDR2 desktop DIMM running at 533MHz with CL4 latency on a 240-pin unbuffered module
- Capacity2GB
- CAS LatencyCL4
- 2GB capacity expands multitasking headroom for everyday desktop workloads
- DDR2 PC2-4200/PC2-4300 at 533MHz matches legacy motherboard specifications
- CL4.0 latency with 1.8V operation keeps timing tight on supported platforms
- 240-pin unbuffered non-ECC DIMM drops straight into standard desktop slots
- Every module tested before dispatch and covered by a lifetime warranty
Simmtec 2 GB DDR2 desktop memory module
This is a 2 GB DDR2 DIMM built for desktop systems. It runs at 533 MHz with a CAS latency of CL4 and uses the standard 240-pin interface. The module operates at 1.8 V and is non-ECC, unbuffered memory. It is supplied new and tested before shipping.
Who this suits and who should look elsewhere
This module suits owners of older desktop boards that accept DDR2 PC2-4200 or PC2-4300 memory and have a free 240-pin slot. It is not for systems that require registered or ECC memory. It is also not for builds that need capacities beyond 2 GB per module or a different memory generation.
The specification that decides fit
The decisive figure is the DDR2 PC2-4200 533 MHz rating combined with the 240-pin form factor and CL4 timing. Your motherboard must support this exact speed and pin layout for the module to work.
Points forts
- 2GB capacity expands multitasking headroom for everyday desktop workloads
- DDR2 PC2-4200/PC2-4300 at 533MHz matches legacy motherboard specifications
- CL4.0 latency with 1.8V operation keeps timing tight on supported platforms
- 240-pin unbuffered non-ECC DIMM drops straight into standard desktop slots
- Every module tested before dispatch and covered by a lifetime warranty
Caractéristiques
| Capacity | 2GB |
|---|---|
| CAS Latency | CL4 |
Questions sur cet article
What does the PC2-4200 533MHz rating mean for actual system performance?
The module runs at 533 MHz with CL4.0 latency, delivering the PC2-4200 bandwidth figure when installed in a compatible desktop.
How does the DDR2 interface and PC2-4200/PC2-4300 designation limit the usable speed?
The DDR2 DIMM is rated for 533 MHz (PC2-4200) and also marked PC2-4300, so the memory controller will operate it at up to 533 MHz.
What physical slot and voltage does the 240-pin DIMM require?
It needs a 240-pin DDR2 desktop DIMM slot and runs at 1.8 V.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



