Simmtec, Inc
Simmtec, Inc 32GB (4x8GB) DDR3 1066 PC3 8500 NON-ECC UDIMM 2Rx8 Desktop Memory
A 32 GB desktop kit of four 8 GB DDR3 modules running at 1066 MHz PC3 8500 with 240-pin 1.5 V non-ECC unbuffered layout
- Capacity32GB (4 x 8GB)
- SpeedDDR3 1066 (PC3 8500)
- 32 GB total capacity for demanding desktop workloads
- Four 8 GB modules populate all slots on many boards
- DDR3-1066 speed rated to PC3-8500 bandwidth
- Non-ECC unbuffered design suits standard consumer motherboards
- 5 V operation at 240-pin UDIMM form factor
Capacity & Speed
This kit provides 32GB of DDR3 memory in a matched set of four 8GB UDIMM modules. It runs at 1066 MT/s with a PC3 8500 rating and operates at the standard 1.5V for unbuffered desktop DIMMs. The 2Rx8 organisation suits mainstream desktop boards that accept 240-pin DDR3 memory.
Who It Suits
The kit targets owners of older desktop systems that require DDR3 1066 modules for a straightforward capacity upgrade. Builders who need ECC registered modules or higher frequencies should look elsewhere. Systems limited to lower maximum capacities per slot or those requiring a different DDR generation cannot use this memory.
Deciding Specification
The critical figure is the DDR3 1066 speed grade combined with the non-ECC unbuffered UDIMM form factor. Motherboard documentation must list support for PC3 8500 240-pin DIMMs at this frequency for the kit to function correctly.
Points forts
- 32 GB total capacity for demanding desktop workloads
- Four 8 GB modules populate all slots on many boards
- DDR3-1066 speed rated to PC3-8500 bandwidth
- Non-ECC unbuffered design suits standard consumer motherboards
- 5 V operation at 240-pin UDIMM form factor
Caractéristiques
| Capacity | 32GB (4 x 8GB) |
|---|---|
| Speed | DDR3 1066 (PC3 8500) |
Questions sur cet article
What motherboard slot type is required for these 240-pin DDR3 UDIMM modules?
A desktop motherboard with DDR3 240-pin DIMM slots is required. The kit contains four unbuffered non-ECC modules that fit standard desktop sockets.
Can I mix these PC3-8500 modules with existing DDR3 memory that runs at a different speed?
Yes. The motherboard will run all installed DDR3 modules at the speed of the slowest kit. These modules are rated for 1066 MT/s.
How can I confirm the system recognises the full 32 GB capacity after installation?
Check the BIOS memory summary or the operating system task manager. Both should report 32 GB total across the four 8 GB modules.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



