Simmtec, Inc
Simmtec, Inc 4GB DDR3 1600 PC3 12800 2Rx8 240-Pin 1.35V 1.5V UDIMM Desktop RAM
A 4GB DDR3 desktop module running at 1600MHz with dual-voltage 1.35V or 1.5V operation
- Capacity4GB
- SpeedDDR3 1600 (PC3 12800)
- 4GB capacity supports everyday desktop workloads
- DDR3 1600 speed delivers responsive system performance
- Dual voltage 1.35V and 1.5V fits a wider range of motherboards
- 240-pin UDIMM form factor installs in standard desktop slots
- Built with major-brand chips meeting JEDEC standards
Capacity and Speed
This Simmtec desktop memory module provides 4 GB of DDR3 capacity running at 1600 MHz with a PC3-12800 rating. It uses a 240-pin UDIMM form factor and a 2Rx8 chip organisation for standard desktop installations.
Suitable Builds and Limitations
The dual-voltage design operates at either 1.35 V or 1.5 V, making it compatible with a wide range of DDR3 motherboards. Systems that require ECC error correction or registered modules cannot use this non-ECC unbuffered stick.
Deciding Specification
The single specification that determines fit is the DDR3 1600 (PC3 12800) rating combined with the 240-pin UDIMM interface; the module will only work in slots designed for that exact generation and pin count.
Points forts
- 4GB capacity supports everyday desktop workloads
- DDR3 1600 speed delivers responsive system performance
- Dual voltage 1.35V and 1.5V fits a wider range of motherboards
- 240-pin UDIMM form factor installs in standard desktop slots
- Built with major-brand chips meeting JEDEC standards
Caractéristiques
| Capacity | 4GB |
|---|---|
| Speed | DDR3 1600 (PC3 12800) |
Questions sur cet article
Will my motherboard need a 240-pin DDR3 slot to accept this module?
Yes, the stick is a 240-pin DDR3 UDIMM and fits only motherboards with a matching DDR3 DIMM socket.
Can I run this 1.35 V stick next to my existing 1.5 V DDR3 modules?
The module is dual-voltage rated at 1.35 V and 1.5 V, so it will operate at the higher voltage when mixed with standard 1.5 V DDR3.
How do I confirm the RAM is running at the rated 1600 MT/s after installation?
Check the memory speed reported in your BIOS or a system-information tool; it should show 1600 MHz (PC3-12800) when the module is recognised correctly.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



