Simmtec, Inc
Simmtec, Inc 64GB (8x8GB) DDR3 1600 PC3-12800 240-Pin 10-10-10-27 desktop RAM
Eight 8 GB DDR3 DIMMs totalling 64 GB, running at 1600 MHz with 10-10-10-27 timings and blue heatspreaders
- Capacity64GB (8 x 8GB)
- SpeedDDR3 1600 (PC3 12800)
- 64GB capacity for demanding multitasking workloads
- DDR3 1600 speed delivers responsive system performance
- 10-10-10-27 timings provide stable operation
- XMP ready for simple one-click configuration
- Blue heatspreaders help maintain cool temperatures
Kit Composition
This 64GB kit contains eight 8GB DDR3 modules running at 1600MHz with PC3-12800 bandwidth. The 240-pin DIMMs operate at 1.5V with 10-10-10-27 timings and feature blue heatspreaders. XMP support allows automatic configuration on compatible motherboards.
Platform Fit
The kit is designed for Intel platforms using LGA 1155, LGA 1156, LGA 1366 and LGA 2011 sockets, plus AMD AM3, AM3+, Llano and FM1 systems. Builders needing ECC registered modules, different pin counts or capacities beyond 64GB should consider other options.
Deciding Spec
The DDR3 240-pin interface determines whether this kit fits a given motherboard. Systems that require a different memory generation or pin layout cannot use these modules, so verifying the board specification is essential before purchase.
Points forts
- 64GB capacity for demanding multitasking workloads
- DDR3 1600 speed delivers responsive system performance
- 10-10-10-27 timings provide stable operation
- XMP ready for simple one-click configuration
- Blue heatspreaders help maintain cool temperatures
Caractéristiques
| Capacity | 64GB (8 x 8GB) |
|---|---|
| Speed | DDR3 1600 (PC3 12800) |
Questions sur cet article
Does my motherboard need to support XMP for this kit's 1600MHz speed and 10-10-10-27 timings?
The kit is XMP ready, so an XMP-capable motherboard and BIOS will apply the 1600MHz speed and 10-10-10-27 timings automatically. Without XMP the modules will run at standard DDR3 JEDEC speeds instead.
Will these 240-pin DDR3 modules fit and work alongside older DDR3 DIMMs already in my system?
They use the standard 240-pin DDR3 form factor, so they physically fit any DDR3 desktop slot. Mixing modules of different speeds or timings is possible but the memory controller will run all installed sticks at the lowest common settings.
How can I verify the full 64GB kit is running at 1600MHz with the correct 10-10-10-27 timings after installation?
Open the BIOS or a system-information tool such as CPU-Z. Confirm the memory frequency reads 1600MHz (or 800MHz double data rate) and the timings show 10-10-10-27. The total installed capacity should report 64GB across all eight slots.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



