Simmtec, Inc
Simmtec, Inc 8GB 2x4GB DDR2 533MHz PC2-4200/4300 240-pin 1.8V desktop RAM
8GB dual-channel DDR2 kit running at 533 MHz with PC2-4200 and PC2-4300 ratings, 240-pin DIMMs at 1.8 V for desktop upgrades
- Capacity8GB (2 x 4GB)
- 8GB dual-channel capacity for smoother multitasking with 2 x 4GB modules
- Tested DDR2 reliability at 533MHz PC2-4200/4300 speeds
- Non-ECC unbuffered design suited for standard desktop workloads
- 8V operation matching legacy DDR2 platform requirements
- 240-pin DIMM form factor fits compatible desktop motherboards
Capacity and purpose
This kit provides 8 GB of DDR2 memory in a matched pair of 4 GB modules. It targets owners of legacy desktop systems that still rely on 240-pin DIMM slots and need a reliable upgrade to extend service life.
Interface limits
The modules operate at 533 MHz and are rated for both PC2-4200 and PC2-4300 standards, so the peak bandwidth is capped by the DDR2 generation. Systems that require higher clock speeds or newer memory types will not be able to use this kit.
Build and daily use
Each stick is non-ECC, non-parity and unbuffered, running at the standard 1.8 V. The 240-pin edge connector fits directly into compatible desktop sockets without adapters, and every module is tested before shipment to reduce the risk of crashes or motherboard damage from defective chips.
Points forts
- 8GB dual-channel capacity for smoother multitasking with 2 x 4GB modules
- Tested DDR2 reliability at 533MHz PC2-4200/4300 speeds
- Non-ECC unbuffered design suited for standard desktop workloads
- 8V operation matching legacy DDR2 platform requirements
- 240-pin DIMM form factor fits compatible desktop motherboards
Caractéristiques
| Capacity | 8GB (2 x 4GB) |
|---|
Questions sur cet article
Should I choose the 2x4GB kit or a single 8GB module for my desktop upgrade?
The kit ships as two 4GB DIMMs, giving you 8GB total and enabling dual-channel operation on boards that support it.
What real-world speed will I see from the 533MHz rating once installed?
The modules run at 533MHz DDR2, delivering PC2-4200 or PC2-4300 bandwidth depending on your motherboard's memory controller.
Does the 240-pin DDR2 interface limit the maximum throughput on my system?
The 240-pin DDR2 DIMMs operate at 1.8V and are capped by the DDR2 standard at the rated 533MHz data rate.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



