Simmtec, Inc
Simmtec, Inc 8GB DDR4 2400 PC4-19200 2Rx8 1.2V Non-ECC UDIMM 1CA80AT
An 8 GB DDR4 2400 UDIMM module rated PC4-19200 at 1.2 V, built with major-brand DRAM and validated for OEM compatibility
- Capacity8GB
- SpeedDDR4 2400 (PC4 19200)
- 8GB capacity expands desktop multitasking headroom
- DDR4 2400 speed delivers 19200 MB/s bandwidth
- 2Rx8 organisation increases rank-level parallelism
- 2 V operation reduces power draw per module
- Non-ECC UDIMM fits standard consumer motherboards
OEM-compatible DDR4 module
This Simmtec, Inc module provides 8GB of DDR4 2400 memory rated at PC4-19200. It is built as a 2Rx8 non-ECC UDIMM operating at 1.2V and carries the OEM part number 1CA80AT. The stick is designed as a direct replacement for systems that specify this exact configuration.
Fits standard DDR4 desktop slots
The UDIMM form factor slots into any desktop motherboard that accepts DDR4 2400 non-ECC memory. Running at 1.2V keeps power draw low and leaves headroom for other components. Matching modules ship together so a dual-channel pair installs without mixing different ICs or timings.
Suits repairs and capacity upgrades
Buyers replacing a failed stick or adding a single 8GB module to an empty slot will find the correct spec here. Systems that require ECC, registered DIMMs, or speeds above DDR4 2400 cannot use this module. Servers needing registered memory should look elsewhere.
Points forts
- 8GB capacity expands desktop multitasking headroom
- DDR4 2400 speed delivers 19200 MB/s bandwidth
- 2Rx8 organisation increases rank-level parallelism
- 2 V operation reduces power draw per module
- Non-ECC UDIMM fits standard consumer motherboards
Caractéristiques
| Capacity | 8GB |
|---|---|
| Speed | DDR4 2400 (PC4 19200) |
Questions sur cet article
What sustained-use limit appears first with this 1.2V DDR4 module?
The 1.2 V operating voltage is the primary electrical limit; running continuously at DDR4 2400 keeps the module within its rated power envelope without exceeding the specified voltage.
How much heat or noise does this non-ECC UDIMM produce when running all day?
As a passive 1.2 V DDR4 UDIMM with no moving parts it generates only modest heat and zero audible noise; typical case airflow is sufficient for continuous operation.
What must the motherboard already provide for this 2Rx8 DDR4 DIMM to work?
A desktop DDR4 UDIMM slot wired for 2400 MT/s operation at 1.2 V; the board must accept non-ECC, unbuffered modules in a 2Rx8 organisation.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



