SK hynix
SK hynix 2GB PC2-6400 DDR2-800 DIMM Desktop RAM
2GB DDR2-800 desktop DIMM with 240-pin non-ECC layout for older system upgrades
- Capacity2GB
- ECCNO
- Buffered/RegisteredNO
- 2GB capacity supports everyday desktop tasks
- DDR2-800 speed delivers 6400 MB/s bandwidth
- 240-pin DIMM fits standard desktop motherboards
- Non-ECC unbuffered design suits consumer systems
- CL12 CAS latency at 666 MHz clock
2GB DDR2-800 Desktop DIMM
This SK hynix module provides 2GB of DDR2 memory rated at PC2-6400 and 800 MT/s. It uses a standard 240-pin DIMM form factor and is built as a 2Rx8 unbuffered, non-ECC stick. The part is suited for upgrading or repairing older desktop platforms that accept this generation of memory.
Ideal for legacy desktop upgrades
Builders restoring or maintaining systems that take DDR2 DIMMs will find this module a direct match. It is not suitable for anyone needing ECC error correction or registered buffering. Buyers whose boards require a newer memory generation or a different pin count must look elsewhere.
240-pin DDR2 interface decides fit
The single specification that determines compatibility is the 240-pin DDR2 interface running at PC2-6400 speed. Only motherboards designed for this exact pin layout and signalling standard can accept the module. Verify the board manual before purchase.
Points forts
- 2GB capacity supports everyday desktop tasks
- DDR2-800 speed delivers 6400 MB/s bandwidth
- 240-pin DIMM fits standard desktop motherboards
- Non-ECC unbuffered design suits consumer systems
- CL12 CAS latency at 666 MHz clock
Caractéristiques
| Brand | Hynix |
|---|---|
| Model | 2Rx8 PC2-6400U-666-12 |
| Capacity | 2GB |
| ECC | NO |
| Buffered/Registered | NO |
Questions sur cet article
What motherboard slot does the 240-pin DDR2 DIMM require?
The module fits a standard 240-pin DDR2 DIMM socket on a desktop motherboard that supports PC2-6400 memory.
Can I add this 2Rx8 PC2-6400U-666-12 stick next to older DDR2 modules running at lower speeds?
Yes, the memory will down-clock to match the slowest installed module while keeping the same 240-pin DDR2 interface.
How do I confirm the module is running at DDR2-800 after installation?
Check the BIOS memory information or a system utility such as CPU-Z; it should report 800 MT/s and PC2-6400 bandwidth.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



