Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
E1.S enterprise SSD, green circuit board with gold edge connector and silver label, 9.5mm thick

Solidigm

Solidigm D7-P5520 7.68TB E1.S PCIe 4.0 x4 enterprise SSD SSDPFUKX076T1OZ

SKU CH-JNN8-9MFAJ MPN SSDPFUKX076T1OZ

A 7.68 TB E1.S enterprise SSD delivering 6600 MB/s reads and 4200 MB/s writes with 14.0 PBW endurance

  • Form FactorE1.S
  • Capacity7.68TB
  • Memory Components3D NAND TLC
  • InterfacePCI-Express 4.0 x4
  • Max Sequential ReadUp to 6600 MBps
  • Max Sequential WriteUp to 4200 MBps
  • High capacity of 7.68TB supports large datasets
  • Sequential read up to 6600 MBps accelerates data access
  • Sequential write up to 4200 MBps speeds up ingest workloads
  • Random read up to 1,100,000 IOPS handles heavy transactional traffic
  • 0 PBW endurance rating extends drive lifespan in write-intensive use

7.68TB E1.S enterprise SSD

The Solidigm D7-P5520 delivers 7.68TB of capacity in the E1.S 9.5mm form factor. It connects over PCI-Express 4.0 x4 and uses 3D NAND TLC memory. The drive is built for data centre and server environments that need high-density storage in a compact footprint.

Capacity and endurance headroom

With 7.68TB of usable space the drive accommodates large datasets, virtualisation images and warm-tier workloads. Endurance is rated at 14.0 PBW, so sustained write traffic is supported until the written data approaches that threshold. Sequential reads reach 6600 MBps and writes 4200 MBps, while random performance tops out at 1,100,000 read IOPS and 220,000 write IOPS.

E1.S build and daily implications

The E1.S 9.5mm module weighs 72g and draws 5W idle or 18W active, fitting standard hot-plug cages without extra cabling. It operates from 0°C to 70°C and survives 1,000 G shock plus 2.17 GRMS operating vibration. Builders needing a 15mm or U.2 form factor, or a higher write-endurance tier, should look elsewhere.

Points forts

  • High capacity of 7.68TB supports large datasets
  • Sequential read up to 6600 MBps accelerates data access
  • Sequential write up to 4200 MBps speeds up ingest workloads
  • Random read up to 1,100,000 IOPS handles heavy transactional traffic
  • 0 PBW endurance rating extends drive lifespan in write-intensive use

Caractéristiques

BrandSolidigm
SeriesD7-P5520
Part NumberAA0020013
Form FactorE1.S
Capacity7.68TB
Memory Components3D NAND TLC
InterfacePCI-Express 4.0 x4
Max Sequential ReadUp to 6600 MBps
Max Sequential WriteUp to 4200 MBps
4KB Random ReadUp to 1,100,000 IOPS
4KB Random WriteUp to 220,000 IOPS
Read Latency75µs
Write Latency15µs
Endurance14.0 PBW
MTBF2,000,000 hours
Power Consumption (Idle)5W
Power Consumption (Active)18W
Operating Temperature0°C ~ +70°C
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Weight72g +/- 5g
Poids d’expédition0.20 kg
Dimensions du colis160 × 120 × 30 mm

Questions sur cet article

Will the E1.S PCIe 4.0 x4 interface work in a server that only has U.2 PCIe 3.0 slots?

This drive uses an E1.S PCIe 4.0 x4 interface. It requires a compatible E1.S backplane or adapter; it cannot plug directly into a U.2 PCIe 3.0 slot without a physical and electrical converter.

How can I verify the 6600 MBps sequential read and 1100000 IOPS random read after installation?

Run a benchmark tool such as fio or CrystalDiskMark against the drive. Compare the measured sequential read and 4 KB random read results to the rated 6600 MBps and 1100000 IOPS figures.

Does the single pack include a heatsink, mounting screws or a PCIe adapter bracket?

The single pack contains the 7.68 TB E1.S drive only. Heatsinks, mounting screws and any PCIe adapter brackets are not included and must be sourced separately.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.