Super Flower
Super Flower Combat II FP 1000W power supply
Fully modular 1000 W ATX 3.1 unit with Cybenetics Platinum and A+ noise ratings, 135 mm FDB fan, 140 mm depth and native 12V-2x6 connector
- TypeATX3.1/ ATX3.0 Compatible
- Maximum Power1000 W
- Fans1 x 135 mm
- PFCActive
- Main Connector20+4Pin
- +12V RailsSingle
- Cybenetics Platinum efficiency cuts waste heat and running cost
- Cybenetics A+ noise rating keeps operation near-silent under load
- Full-modular embossed ribbon cables simplify routing and improve airflow
- ATX 3.1 and PCIe 5.1 ready with native 12V-2x6 for modern GPUs
- 135 mm fluid-dynamic-bearing fan with zero-RPM ECO mode for quiet idle
Super Flower Combat II FP 1000W power supply
This fully modular ATX unit delivers 1000 W of continuous power and meets the ATX 3.1 and PCIe 5.1 specifications. It holds Cybenetics Platinum efficiency and Noise A+ certifications. A 135 mm fluid dynamic bearing fan supports a zero-RPM ECO mode for silent low-load operation. First-tier Japanese capacitors and a single +12 V rail provide stable output for demanding builds.
Check your build before ordering
Verify that your chassis can accommodate a 140 mm deep power supply. Confirm your motherboard uses a standard 20+4 pin main connector and that your graphics card or CPU power requirements match the supplied native 12V-2x6 and unique 12-pin to dual PCIe 6+2 pin or CPU 4+4 pin cables. Ensure the input voltage range of 100 to 240 V suits your local mains supply.
Ideal for high-end PCs needing certified quiet
This unit suits builders who want Platinum-rated efficiency, A+ acoustics and ATX 3.1 compliance with native 12V-2x6 support. The embossed ribbon cables help keep custom loops or compact cases tidy. Buyers who need a shorter chassis depth, a lower maximum wattage or a non-modular design should look at alternative models.
Points forts
- Cybenetics Platinum efficiency cuts waste heat and running cost
- Cybenetics A+ noise rating keeps operation near-silent under load
- Full-modular embossed ribbon cables simplify routing and improve airflow
- ATX 3.1 and PCIe 5.1 ready with native 12V-2x6 for modern GPUs
- 135 mm fluid-dynamic-bearing fan with zero-RPM ECO mode for quiet idle
Caractéristiques
| Brand | Super Flower |
|---|---|
| Type | ATX3.1/ ATX3.0 Compatible |
| Maximum Power | 1000 W |
| Fans | 1 x 135 mm |
| PFC | Active |
| Main Connector | 20+4Pin |
| +12V Rails | Single |
| Max PSU Length | 140 mm |
| Modular | Full Modular |
| Input Voltage | 100 - 240 V |
Questions sur cet article
What cables are included and what must be purchased separately?
The unit ships with a full modular cable set including the unique 12-pin to dual PCIe 6+2 pin or CPU 4+4 pin cable, embossed ribbon cables for other connections, and all standard ATX 3.1 connectors. No extra cables are required for a typical build.
Which version or capacity of this power supply should I choose?
This model is a single 1000 W unit with Cybenetics Platinum and A+ Noise ratings, ATX 3.1 and PCIe 5.1 compliance, and a native 12V-2x6 connector. Choose it when your build needs that exact wattage and feature set.
What does the 1000 W rating mean once the unit is installed in a real system?
It delivers up to 1000 W continuously on a single +12 V rail, meets ATX 3.1 transient spike requirements for modern GPUs, and runs with zero RPM in ECO mode at low loads thanks to the 135 mm fluid dynamic bearing fan.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



