Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Square black plastic 60 mm case fan with lead wires

SXDOOL

SXDOOL AFB0612VHC 12V 0.36A 60x60x13mm case fan

SKU CH-YSCX-9Y20V MPN AFB0612VHC

60 mm dual-ball-bearing DC fan spins at 5400 rpm with 38 dB noise at 12 V

  • Dual ball bearing for longer service life
  • 38 dB noise level keeps system quiet
  • 5400 rpm nominal speed delivers strong airflow
  • 12 V 0.36 A input draws only 2.88 W
  • 60 × 60 × 13 mm fits standard 60 mm mounts

Compact 60 mm 12 V DC case fan

The Delta AFB0612VHC is a 60 × 60 × 13 mm dual-ball-bearing fan that runs on 12 V and draws 0.36 A. Its nominal speed is 5 400 rpm with a rated noise level of 38 dB. The plastic frame uses flange mounting and lead-wire termination for straightforward installation in tight chassis.

Suited for voltage-controlled 60 mm slots

Builders who need a 12 V fan that fits a 60 mm square cut-out and can tolerate 38 dB will find this unit appropriate. It is not suited for systems that require PWM speed control or quieter operation below the rated noise level.

7 V to 13.8 V operating voltage range

The fan accepts an input range of 7 V to 13.8 V, so it will start and run on standard 12 V rails and survive modest voltage variation. Verify that your header or controller supplies within this window before fitting.

Points forts

  • Dual ball bearing for longer service life
  • 38 dB noise level keeps system quiet
  • 5400 rpm nominal speed delivers strong airflow
  • 12 V 0.36 A input draws only 2.88 W
  • 60 × 60 × 13 mm fits standard 60 mm mounts

Caractéristiques

Aucune caractéristique publiée pour cet article pour l’instant.

Questions sur cet article

Will the 60 mm by 60 mm flange with 13 mm depth fit my chassis fan slot?

The fan measures 60 mm square and 13 mm thick, so it fits any standard 60 mm mounting pattern with at least 13 mm clearance behind the frame.

Which way do I connect the lead wires for the 12 V, 0.36 A supply?

Connect the red wire to +12 V and the black wire to ground; the fan rotates clockwise when viewed from the label side, so verify airflow direction before securing the screws.

How often should I expect to replace the dual ball bearings at 38 dB noise?

Dual ball bearings typically run for tens of thousands of hours; if noise rises above the rated 38 dB or speed drops below 5400 rpm, plan a replacement.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.