Synology Inc.
Synology RS826RP+ AMD Ryzen V1500B 4-Bay Rackmount NAS 16GB RAM 1.6TB Cache 64TB Drives
A 4-bay rackmount NAS with AMD Ryzen V1500B processor, 16GB DDR4 RAM, 1.6TB cache and 64TB of Synology Plus drives, pre-assembled and tested
- Port RJ-454 x 10/100/1000M
- Port USB2 x USB 3.2 Gen 1 Ports
- Form Factor4-Bay
- ProcessorAMD Ryzen
- Installed Memory16GB
- Included HDD Capacity64TB (4 x 16TB)
- Quad-core AMD Ryzen V1500B at 2.2 GHz powers demanding workloads
- 16GB DDR4 RAM and 1.6TB enterprise cache accelerate read and write performance
- Four 1GbE RJ-45 ports support link aggregation and automatic failover
- Four hot-swappable bays hold 64TB of Synology Plus drives pre-installed
- PCIe Gen3 slot allows 10GbE, 25GbE or M.2 SSD adapter upgrades
Compact 1U rackmount NAS for edge and branch offices
The Synology RS826RP+ is a 1U rackmount network-attached storage system built for edge deployments, branch offices and remote business workloads. It ships fully assembled with 16GB DDR4 memory, 1.6TB enterprise cache and four 16TB Synology Plus drives for 64TB raw capacity. A quad-core AMD Ryzen V1500B processor at 2.2 GHz powers the platform.
Thermals, noise and power draw in normal operation
The chassis operates between 0 °C and 35 °C with humidity tolerance of 5 to 95 percent relative humidity. Redundant 100-240 VAC power supplies draw from standard mains at 50 or 60 Hz. Four 1GbE RJ-45 ports and two USB 3.2 Gen 1 ports provide connectivity without adding external adapters.
Behaviour under sustained load rather than short
Sequential throughput reaches over 2000 MB/s read and 1300 MB/s write in the vendor-tested configuration. Link aggregation across the four 1GbE ports enables bandwidth scaling, load balancing and automatic failover during continuous workloads. A PCIe Gen3 slot accepts 10GbE, 25GbE or M.2 SSD adapters, and one RX426 expansion unit can extend the system to eight bays and 192 TB raw capacity.
Points forts
- Quad-core AMD Ryzen V1500B at 2.2 GHz powers demanding workloads
- 16GB DDR4 RAM and 1.6TB enterprise cache accelerate read and write performance
- Four 1GbE RJ-45 ports support link aggregation and automatic failover
- Four hot-swappable bays hold 64TB of Synology Plus drives pre-installed
- PCIe Gen3 slot allows 10GbE, 25GbE or M.2 SSD adapter upgrades
Caractéristiques
| Brand | Synology |
|---|---|
| Model | RS826RP+ |
| Port RJ-45 | 4 x 10/100/1000M |
| Port USB | 2 x USB 3.2 Gen 1 Ports |
| Form Factor | 4-Bay |
| Processor | AMD Ryzen |
| Installed Memory | 16GB |
| Included HDD Capacity | 64TB (4 x 16TB) |
| Management | Web-Based, DHCP Client |
| LEDs | Power, HDD (Hard Disk Drive), LAN (10/100) |
| Power | 100-240 VAC 50/60Hz |
| Temperature | 0°C - 35 °C |
| Humidity | 5-95% R.H |
| Dimensions | 44 mm × 480 mm × 492.6 mm |
| Weight | 8.0 kg |
| Package Contents | Main Unit × 1 Accessory Pack × 1 AC Power Cord × 1 All Configuration Items |
Questions sur cet article
How do I mount the 1U RS826RP+ in a standard 19-inch rack and which step is most often missed?
Slide the 44 mm tall chassis into the rack using the included accessory pack, then secure all four mounting screws; the step most often missed is tightening the rear brackets so the unit cannot shift under vibration.
What maintenance will the 1.6 TB Synology Enterprise Cache and 16 GB DDR4 memory need later?
The two 800 GB cache SSDs are hot-swappable and should be replaced when SMART reports wear-out; the DDR4 memory is not user-serviceable and requires no routine maintenance.
At what point does the 100–240 VAC power supply or 35 °C operating limit become the bottleneck during sustained write loads?
The 35 °C ambient ceiling is reached first; sustained writes heat the four 16 TB drives and cache SSDs, so airflow must keep intake air at or below 35 °C to avoid thermal throttling.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



