Thermal Grizzly
Thermal Grizzly TG-MP-HC-120-100-40-2 Minus Pad High Compression 120x100x4.0mm 2-Pack thermal pad
High-compression thermal pad kit bridges uneven component heights on GPUs and SSDs while maintaining conductivity under pressure
- FeaturesThe thermal pads of the Minus Pad High Compression series of
- High compressibility bridges varying component heights
- Excellent thermal conductivity maintained under heavy compression
- Electrically non-conductive for safe GPU and SSD use
- Versatile pad fits VRAM, voltage regulators, contact surfaces
- Easy handling simplifies graphics-card water-cooling conversions
Thermal pad for GPU and SSD conversions
The Minus Pad High Compression is a 120x100mm thermal pad designed for graphics card water-cooling conversions and SSD cooling. Each pack contains two pads at 4.0mm thickness. The electrically non-conductive material bridges VRAM, voltage regulators and GPU dies in a single application. Builders who need a precise pre-cut shape for a specific laptop or console should look elsewhere.
Sustained thermal behaviour under compression
The pad maintains its thermal conductivity when heavily compressed between uneven component heights. Thermal performance can increase as contact pressure rises across VRM and memory modules. This makes it reliable for long gaming or compute sessions where clamp force varies. Users who require a fixed-thickness pad that never compresses will not find that characteristic here.
Thermals, noise and power impact
The compliant silicone formulation fills microscopic gaps without adding electrical risk. Because it adapts to height tolerances, mounting pressure stays even and pump or fan speeds do not need to compensate for poor contact. The material adds no active cooling noise or power draw. Buyers expecting a liquid-metal replacement with higher conductivity than silicone will not get that result.
Points forts
- High compressibility bridges varying component heights
- Excellent thermal conductivity maintained under heavy compression
- Electrically non-conductive for safe GPU and SSD use
- Versatile pad fits VRAM, voltage regulators, contact surfaces
- Easy handling simplifies graphics-card water-cooling conversions
Caractéristiques
| Brand | Thermal Grizzly |
|---|---|
| Model | TG-MP-HC-120-100-40-2 |
| Part Number | TG-MP-HC-120-100-40-2 |
| Features | The thermal pads of the Minus Pad High Compression series offer extremely high compressibility combined with excellent thermal conductivity. They are especially practical when converting a graphics card to a water cooler, as a single pad thickness can be used across various contact points. |
Questions sur cet article
Does the 4.0 mm Minus Pad High Compression pad stay cool and quiet during continuous GPU or SSD operation?
The pad is a passive thermal interface with no moving parts, so it adds no noise and generates no heat of its own; it simply conducts heat away from the component.
What do I need to supply besides the two 120x100 mm pads to complete a graphics-card water-block conversion?
You will need the water block itself, mounting hardware, coolant loop components and a clean, flat mating surface on the GPU die and VRM areas.
Will the 4.0 mm High Compression pads mate properly with the original thinner pads on an older reference-design GPU?
Yes — the pads are designed to compress well beyond their nominal 4.0 mm thickness, bridging the height differences between VRAM, voltage regulators and the GPU die in a single application.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



