Transcend
Transcend 16GB (2x8GB) DDR4 3200MHz CL22 1.2V 288-pin UDIMM desktop RAM
16 GB dual-channel DDR4 kit running at 3200 MT/s with CL22 timing and 1.2 V operation for up to 25.6 GB/s bandwidth
- Faster data throughput with 3200 MT/s speed delivering 25.6GB/s bandwidth
- Lower power draw at 1.2V nominal voltage saving up to 40% versus DDR3 at 1.5V
- Reliable operation from brand-name DRAM chips passing strict screening and testing
- Broad desktop compatibility via JEDEC-standard 288-pin UDIMM design for Intel and Ryzen systems
- Dual-channel 16GB kit using two 8GB modules with CL22 latency for responsive multitasking
Desktop DDR4 Kit for Intel and AMD Ryzen Builds
This Transcend JetRam kit supplies 16GB of DDR4 memory in two 8GB modules rated at 3200 MT/s. The unbuffered 288-pin UDIMMs deliver up to 25.6GB/s bandwidth for mainstream desktop workloads. It targets users upgrading older platforms or building new systems on a budget.
Low-Voltage Operation Keeps Thermals and Draw Modest
Running at 1.2V, the modules reduce electrical load on the memory controller and cut energy use by up to 40% versus standard DDR3 at 1.5V. Lower voltage also helps keep operating temperatures down during typical daily use. No active cooling is required for normal operation.
Tested Chips and Lifetime Coverage Support
Each module uses brand-name DRAM chips screened through Transcend's strict testing process for broad compatibility. The kit is JEDEC compliant and backed by a limited lifetime warranty. No extra software or accessories are included to alter functionality.
Points forts
- Faster data throughput with 3200 MT/s speed delivering 25.6GB/s bandwidth
- Lower power draw at 1.2V nominal voltage saving up to 40% versus DDR3 at 1.5V
- Reliable operation from brand-name DRAM chips passing strict screening and testing
- Broad desktop compatibility via JEDEC-standard 288-pin UDIMM design for Intel and Ryzen systems
- Dual-channel 16GB kit using two 8GB modules with CL22 latency for responsive multitasking
Caractéristiques
Aucune caractéristique publiée pour cet article pour l’instant.
Questions sur cet article
How do I install the 288-pin UDIMM modules and what step is often missed?
Align the notch on each 288-pin module with the slot key, press down firmly until both side clips click shut, then verify the BIOS reports 3200 MT/s instead of the fallback 2666 MT/s.
What maintenance or replacement will the DDR4 kit need later?
No routine maintenance is required; the modules run at 1.2 V with brand-name DRAM screened by Transcend, so they typically last the life of the system unless a stick fails, in which case the limited lifetime warranty covers replacement.
What limit appears first under sustained heavy workloads?
The CAS latency of CL22 at 3200 MT/s sets the timing ceiling, so latency-sensitive tasks hit that boundary before bandwidth or the 1.2 V thermal envelope becomes a bottleneck.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



