Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Silver 3.5 inch bare hard drive with green circuit board

Western Digital

Western Digital WD1002FBYS 1TB 7200 RPM 32MB SATA 3.0Gb/s 3.5" internal hard drive

SKU CH-7JC2-N2ECR MPN WD1002FBYS

A 1 TB 3.5″ SATA desktop drive with 7200 RPM, 32 MB cache and dual-processor design for enterprise workloads

  • PackagingBare Drive
  • Capacity1TB
  • RPM7200 RPM
  • InterfaceSATA 3.0Gb/s
  • Cache32MB
  • Average Latency4.2ms
  • Dual processor boosts performance by 20%
  • 7200 RPM and 32MB cache for fast access
  • StableTrac secures motor shaft at both ends to cut vibration
  • RAFF technology corrects vibration in real time for 60% gain in high-vibration settings
  • TLER prevents drive fallout during RAID error recovery

Enterprise-grade storage drive

The Western Digital RE3 WD1002FBYS is a 1 TB 3.5-inch internal hard drive built for servers and storage arrays. It spins at 7200 RPM with a 32 MB cache and a SATA 3.0Gb/s interface. A dual-processor design delivers a 20% performance improvement over the previous generation.

Vibration-resistant integration

The drive fits a standard 3.5-inch bay and connects via SATA data and power cables. StableTrac secures the motor shaft at both ends to cut system-induced vibration. Fourth-generation RAFF technology monitors and corrects linear and rotational vibration in real time, yielding a 60% improvement in high-vibration environments over the previous generation. TLER limits error-recovery time to prevent drive fallout in RAID arrays.

Sustained workload behaviour

Average latency sits at 4.2 ms under continuous operation. The vibration-correction features maintain throughput when multiple drives share a chassis. Units are supplied as bare drives, erased to DoD 5220.22-M standard, and may show up to 25 bad sectors or cosmetic label differences. Not suited for buyers who need a formatted, partitioned volume out of the box or who require a newer interface than SATA 3.0Gb/s.

Points forts

  • Dual processor boosts performance by 20%
  • 7200 RPM and 32MB cache for fast access
  • StableTrac secures motor shaft at both ends to cut vibration
  • RAFF technology corrects vibration in real time for 60% gain in high-vibration settings
  • TLER prevents drive fallout during RAID error recovery

Caractéristiques

BrandWestern Digital
SeriesRE3
ModelWD1002FBYS
PackagingBare Drive
Capacity1TB
RPM7200 RPM
InterfaceSATA 3.0Gb/s
Cache32MB
Average Latency4.2ms
Form Factor3.5"
FeaturesDual processor - Twice the processing power results in a 20% performance improvement over the previous generation.
StableTrac - The motor shaft is secured at both ends to reduce system-induced vibration and stabilize platters for accurate tracking during read and write operations
RAID-specific, time-limited error recovery (TLER) - Prevents drive fallout caused by the extended hard drive error-recovery processes common to desktop drives.
NoTouch ramp load technology - The recording head never touches the disk media ensuring significantly less wear to the recording head and media as we
Poids d’expédition0.73 kg
Dimensions du colis152 × 102 × 25 mm

Questions sur cet article

How long is the average latency before data transfers begin?

The average latency is 4.2 ms before the drive can start transferring data.

Does the dual-processor design increase heat or noise during continuous operation?

The dual processor improves performance by 20 percent without increasing acoustic or thermal output.

What SATA host interface must the system provide for this 3.5 inch drive?

The drive requires a SATA 3.0 Gb/s host port and standard 3.5 inch power and data cables.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.