Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Small green circuit board with yellow pin headers and USB cable

Wonrabai Pico 2 W RP2350 Development Board with Pre-Soldered Header

SKU CH-RH74-8P1CT

IoT development board with RP2350 dual-core processor, 2.4 GHz Wi-Fi, Bluetooth 5.2, 520 KB SRAM, 4 MB Flash, and pre-soldered header

  • TypePico 2 W
  • MotherboardPico 2 W
  • CPURP2350, Arm Cortex-M33, Hazard3 RISC-V
  • MemorySRAM
  • CPU Socket TypeM
  • CPU TypeARM Cortex
  • Pre-soldered header saves assembly time with ready-to-use GPIO access
  • Dual-core Arm Cortex-M33 and Hazard3 RISC-V at 150 MHz handles parallel tasks efficiently
  • 4 GHz 802.11n Wi-Fi and Bluetooth 5.2 enable wireless IoT connectivity
  • 26 multi-function GPIO plus 12 PIO state machines support custom peripherals
  • 520 KB SRAM and 4 MB Flash store firmware and data locally

Target Audience

The Wonrabai Pico 2 W is a microcontroller development board built around the RP2350 chip. It suits makers and engineers who need integrated 2.4 GHz 802.11n Wi-Fi and Bluetooth 5.2 for wireless IoT prototypes. The board ships with a yellow pre-soldered header and a USB cable, so it is ready for immediate breadboard experimentation.

Memory and Performance

The RP2350 provides a dual-core Arm Cortex-M33 and dual-core Hazard3 RISC-V architecture clocked up to 150 MHz. On-board resources include 520 KB of SRAM and 4 MB of Flash memory. The 26 multi-function GPIO pins support 2 SPI, 2 I2C, 2 UART, 3 ADC channels and 16 PWM outputs, while 12 programmable I/O state machines handle custom peripheral timing.

Upgrade Context

This board replaces the earlier Pico 2 by adding the Infineon CYW43439 wireless chip and onboard antenna. The jump is worthwhile when a project requires cable-free connectivity or Bluetooth 5.2 peripherals. It is not a fit for applications that need high-speed wired networking, large external memory pools or PCI Express expansion.

Points forts

  • Pre-soldered header saves assembly time with ready-to-use GPIO access
  • Dual-core Arm Cortex-M33 and Hazard3 RISC-V at 150 MHz handles parallel tasks efficiently
  • 4 GHz 802.11n Wi-Fi and Bluetooth 5.2 enable wireless IoT connectivity
  • 26 multi-function GPIO plus 12 PIO state machines support custom peripherals
  • 520 KB SRAM and 4 MB Flash store firmware and data locally

Caractéristiques

BrandWonrabai
ModelPico 2 W
TypePico 2 W
MotherboardPico 2 W
CPURP2350, Arm Cortex-M33, Hazard3 RISC-V
MemorySRAM
CPU Socket TypeM
CPU TypeARM Cortex
North BridgeRP2350
South BridgeRP2350
Number of Memory Slots2x288pin (DDR4) + 2x240pin
Memory StandardSRAM
Maximum Memory Supported512MB
PCI Express x160
PCI Express x40
PCI Express x10
PCI Slots0
Mini Card Slots0
Other Slots0
SATA1 x SATA 3.0Gb/s
SATA RAIDNV RAID 0/1/0+1 JBOD
Additional SATA1 x SATA 3.0Gb/s
Additional SATA RAID0/1
Onboard Video ChipsetRP2350
Max LAN Speed100Mbps
Wireless LANBased on Official RP2350 Chip, Dual-core & Dual-architecture Design, Supports W-I-F--I and Blue--too--th, 2ABCB-PICO2W
BluetoothBased on Official RP2350 Chip, Dual-core & Dual-architecture Design, Supports W-I-F--I and Blue--too--th
PS/22
COM2
Video Ports0
HDMI0
USB 1.1/2.04 x USB 3.0 + 10 x USB 2.0
USB 3.01 x USB 3.0
eSATA1 x eSATA 6.0Gb/s
Audio Ports2 Ports
Onboard USB1 x USB 3.0
Other ConnectorsUSB
FeaturesRP2350, SRAM, 1, 0, USB, Carrier Boards, Computers (PCs, laptops, tablets), Microcontrollers, Sensors, Displays, Peripherals
Dimensions (W x L)3.2 cm x 6.4 cm x 10.2 cm
Package ContentsPico 2 W x 1

Questions sur cet article

Will the 26 GPIO pins on this Pico 2 W board align with my existing Raspberry Pi Pico HATs?

Yes, the 26 multi-function GPIO pins keep the standard Pico pinout so your current HATs and expansion boards will connect without adapters.

How can I confirm the RP2350 dual-core processor and wireless module are functioning after I plug it in?

The board appears as a USB mass-storage device; drag a MicroPython UF2 file onto it, then run a script that prints the CPU frequency and scans for Wi-Fi networks to verify both cores and the CYW43439 radio.

Does the kit include the yellow pre-soldered header and a USB cable, or must I source them separately?

The yellow header is already soldered to the castellated pads and a USB cable is supplied in the box, so no extra parts are required to start developing.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.