XPG
XPG Lancer Blade RGB DDR5 16GB 6000MHz White desktop RAM
Low-profile 16 GB DDR5 desktop memory at 6000 MHz with RGB lighting and a built-in PMIC for stable power delivery
- Capacity16GB
- Speed6000MHz
- Low-profile heatsink clears compact cases and tower coolers
- 6000 MHz DDR5 speed delivers high data throughput
- RGB lighting syncs with major motherboard software and music mode
- Built-in PMIC improves power stability at 1.1 V–1.4 V
- CL 30-40-40 timings support responsive performance at 85 °C max temp
XPG Lancer Blade RGB DDR5 16GB 6000MHz
This 16GB DDR5 module runs at 6000MHz with CL30-40-40 timings and a white low-profile heatsink. It suits builders who want RGB lighting and a compact form factor for smaller cases. The operating voltage ranges from 1.1V to 1.4V.
DDR5 PMIC and voltage limits
A built-in Power Management IC handles on-module regulation for stable supply at lower voltage than DDR4. The rated operating temperature reaches 85°C. Modules without active cooling may throttle under sustained heavy load in tight airflow.
Low-profile U-DIMM installation
The reduced heatsink height clears most tower CPU coolers and fits cramped motherboard layouts. Alignment is standard U-DIMM; seat the module until the retention clips click. Mismatched XMP profiles or an outdated BIOS are the common causes of boot failure.
Points forts
- Low-profile heatsink clears compact cases and tower coolers
- 6000 MHz DDR5 speed delivers high data throughput
- RGB lighting syncs with major motherboard software and music mode
- Built-in PMIC improves power stability at 1.1 V–1.4 V
- CL 30-40-40 timings support responsive performance at 85 °C max temp
Caractéristiques
| Capacity | 16GB |
|---|---|
| Speed | 6000MHz |
Questions sur cet article
Should I choose the 16GB version or is there a larger kit listed for this DDR5 module?
The product page lists a single 16GB module running at 6000MHz with CL30-40-40 timings and a 1.1V-1.4V operating voltage. No larger capacity or multi-stick kit is shown for this specific SKU.
What does the 6000MHz speed mean once the stick is installed in my system?
The module is rated for 6000MT/s data transfer at CL30-40-40 latency. Actual throughput depends on your motherboard's memory controller and whether XMP or EXPO profiles are enabled in the BIOS.
What DDR5 standard does this U-DIMM follow and what limits does it set in practice?
It is a DDR5 U-DIMM with an on-board PMIC for power management. The JEDEC voltage range is 1.1V to 1.4V and the rated speed is 6000MHz at CL30-40-40, which defines the guaranteed operating envelope.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



