Zyvpee
Zyvpee 614NGHH 60x25mm 24V 3.6W 2-wire case fan
60×25 mm 24 V DC axial fan with ball bearing, 3.6 W, 4500–4999 RPM, 30–35 CFM airflow and 35–40 dBA noise
- TypeCase Fan
- CompatibilityCase
- Bearing TypeBall
- RPM4500-4999 RPM
- Air Flow30-35 CFM
- Noise Level35 - 40 dBA
- Ball bearing rated for continuous operation at 4500-4999 RPM
- 30-35 CFM airflow keeps components cool under load
- 24 V 3.6 W input limits power draw
- 60 x 25 mm frame fits standard 60 mm mounts
- 35-40 dBA noise level suits quiet builds
Purpose-built 60 mm axial cooler
The Zyvpee 614NGHH is a 24 V DC axial fan designed for equipment enclosures and industrial chassis. It delivers 30 to 35 CFM at 4 500 to 4 999 RPM while producing 35 to 40 dBA of noise. The two-wire power connection suits fixed-speed cooling circuits.
Suits constant-voltage cooling loops
Engineers maintaining 24 V rail systems with 3.6 W headroom will find the ball-bearing motor a direct fit for 60 x 25 mm mounting holes. Builds that require PWM control, lower voltage rails or higher static pressure should look at alternative designs.
Fixed 24 V two-wire power input
The single specification that decides fit is the 24 V two-wire connector; the fan has no tachometer or PWM wire and cannot be speed-controlled by standard motherboard headers. Verify the supply rail matches exactly before ordering.
Points forts
- Ball bearing rated for continuous operation at 4500-4999 RPM
- 30-35 CFM airflow keeps components cool under load
- 24 V 3.6 W input limits power draw
- 60 x 25 mm frame fits standard 60 mm mounts
- 35-40 dBA noise level suits quiet builds
Caractéristiques
| Series | 614NGHH |
|---|---|
| Model | 614 NGHH |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Ball |
| RPM | 4500-4999 RPM |
| Air Flow | 30-35 CFM |
| Noise Level | 35 - 40 dBA |
| Power Connector | 2 wires |
| Color | Black |
| LED | Non-LED |
| Features | DC axial fan |
| Dimensions | 60*60*25mm |
Questions sur cet article
Will the 60 mm frame and 24 V two-wire connector fit the mounting holes and power header on my existing case?
The fan measures 60 mm square by 25 mm thick and uses a bare two-wire lead for 24 V DC, so it matches standard 60 mm mounting patterns and can be soldered or crimped to a compatible header.
How do I confirm the 614NGHH is spinning at the rated 4500 to 4999 RPM after installation?
Connect the fan to a 24 V source, then read the RPM via BIOS hardware monitor or a fan-speed utility; a steady reading between 4500 and 4999 RPM shows the ball-bearing motor is running to spec.
Does the package include mounting screws or a Molex adapter, or must I supply them myself?
The box contains only the 614NGHH axial fan; mounting screws and any 24 V power adapter are not included and must be sourced separately.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $US
0.00001051BTC
En stock