Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Small black 30mm square case fan with ball bearing and two-wire connector

Zyvpee

Zyvpee AD0312LB-G50 30mm 12V 0.06A 2-Pin Ball Bearing Case Fan

SKU CH-RJSJ-ADRXT

A 30 mm ball-bearing case fan running on 12 V at 0.06 A with a two-pin connector and speeds below 1600 RPM

  • TypeCPU Cooler Fan
  • Fan Size30mm
  • Bearing TypeBall
  • RPM<1600 RPM
  • Power Connector2 Pin
  • ColorBlack
  • Compact 30 mm frame fits tight chassis spaces
  • 12 V 0.06 A draw keeps power use low
  • Ball bearing design extends operating life
  • 2-pin connector simplifies motherboard installation
  • Sub-1600 RPM speed limits acoustic output

Compact 30 mm case fan for tight builds

The Zyvpee AD0312LB-G50 is a 30 mm square frame fan designed for small-form-factor chassis, set-top boxes and router enclosures. It runs on 12 V DC at 0.06 A through a standard two-pin connector. Ball-bearing construction targets longevity in continuous operation. The non-LED black finish keeps the appearance neutral.

Low airflow noise at modest speed

Rated below 1600 RPM, the fan moves a limited volume of air suited to low-heat components. At this speed the acoustic signature stays subdued in typical ambient conditions. Power draw remains at 0.06 A, so the load on a 12 V rail is minimal. The 30 by 10 mm footprint fits where larger fans cannot.

Steady output during extended duty

Ball bearings maintain consistent rotation over long periods without the wear pattern seen in sleeve designs. The low current draw means thermal contribution to the enclosure stays small even after hours of use. Speed does not ramp under load because the two-pin interface lacks PWM control. Builders needing variable speed or higher static pressure should look elsewhere.

Points forts

  • Compact 30 mm frame fits tight chassis spaces
  • 12 V 0.06 A draw keeps power use low
  • Ball bearing design extends operating life
  • 2-pin connector simplifies motherboard installation
  • Sub-1600 RPM speed limits acoustic output

Caractéristiques

Brand3ccooler.com
SeriesAD0312LB-G50
ModelAD0312LB-G50
TypeCPU Cooler Fan
Fan Size30mm
Bearing TypeBall
RPM<1600 RPM
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Fan
Dimensions30*10mm

Questions sur cet article

How do I install the Zyvpee AD0312LB-G50 30mm fan and which orientation step is often missed?

Mount the 30×10 mm frame with the airflow arrow pointing toward the heatsink, then plug the 2-pin connector into the 12 V header; the step most often missed is confirming the arrow direction before tightening the screws.

What maintenance or replacement will the AD0312LB-G50 ball-bearing fan need over time?

The dual ball bearings are rated for long life; expect to clean dust from the blades periodically and replace the fan only if noise increases or RPM drops well below 1600 RPM.

What is the first limit that appears when the AD0312LB-G50 runs continuously at 12 V?

The 0.06 A / 12 V power envelope caps sustained speed at 1600 RPM, so thermal headroom is the first limit reached under continuous load.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.