Zyvpee
Zyvpee AD1012DB-F93 -9B11 105mm 38mm 3-Wire Case Fan
A 105 mm ball-bearing case fan with a 3-wire 12 V connection for focused system cooling
- TypeCase Fan
- Fan Size108mm
- Bearing TypeBall
- Power Connector3 Wires
- ColorBlack
- LEDNon-LED
- 105 mm frame fits tight chassis spaces
- 38 mm thickness moves more air per revolution
- Ball bearing reduces friction for longer service life
- Three-wire connector enables speed monitoring
- 12 V 0.21 A draws minimal power from the supply
Precise 105 × 38 mm footprint
This Zyvpee case fan measures 105 millimetres square by 38 millimetres thick. It fits chassis and radiator mounts that call for the 10538 form factor. Builders working with tight clearances or non-standard mounting holes should verify hole spacing before ordering.
DC 12 V 0.21 A three-wire power
The motor draws 0.21 amps at twelve volts and terminates in a three-wire connector. That connector supplies power and a tachometer signal but no PWM control. Systems that require four-pin PWM headers will not be able to regulate speed through the motherboard.
Straightforward screw mounting
Four corner holes accept standard case screws for a secure fit. The three-wire lead reaches most motherboard headers without extension cables. Misalignment of the mounting holes is the most common installation issue, so measure the chassis pattern first.
Points forts
- 105 mm frame fits tight chassis spaces
- 38 mm thickness moves more air per revolution
- Ball bearing reduces friction for longer service life
- Three-wire connector enables speed monitoring
- 12 V 0.21 A draws minimal power from the supply
Caractéristiques
| Brand | 3ccooler.com |
|---|---|
| Series | AD1012DB-F93 -9B11 |
| Model | AD1012DB-F93 |
| Type | Case Fan |
| Fan Size | 108mm |
| Bearing Type | Ball |
| Power Connector | 3 Wires |
| Color | Black |
| LED | Non-LED |
| Features | Power Cooling |
| Dimensions | 105*38mm |
Questions sur cet article
What does the 0.21 A draw mean for my power supply?
The fan pulls 0.21 A from a 12 V rail, so it adds very little load to any standard PSU.
What does the three-wire connector actually control?
The three wires carry power, ground and a tachometer signal so the motherboard can monitor fan speed.
Will the 105 mm by 38 mm frame fit my case mounts?
The fan measures 105 mm square and 38 mm thick, matching standard 105 mm mounting holes.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $US
0.00001048BTC
En stock