Zyvpee
Zyvpee AFB0612EHE 60*38mm 12V 1.68A 4 Wires Blue Bracket case fan
A 60 × 38 mm axial case fan with dual-ball bearings, 12 V 1.68 A four-wire PWM control and speeds above 7000 RPM
- TypeCase Fan
- Bearing Type2 Ball
- RPM>7000 RPM
- Power Connector4 wires
- ColorBlack
- LEDNon-LED
- High airflow for compact builds with 60×38 mm frame
- Dual-ball bearing rated for >7000 RPM continuous operation
- 12 V 1.68 A draw keeps power budget predictable
- Four-wire PWM connector enables precise speed control
- Blue mounting bracket simplifies installation in tight spaces
Zyvpee AFB0612EHE 60mm DC axial fan
This 60mm by 38mm case fan runs on 12V DC power and draws 1.68A through a four-wire connector. It uses a dual ball bearing for rotation and exceeds 7000 RPM in operation. The unit has a black frame with a blue mounting bracket and no LED lighting. It suits builders needing a compact axial cooler for tight chassis spaces.
Thermals noise and power draw
At 12V the fan pulls 1.68A and spins above 7000 RPM to move air through restricted areas. The dual ball bearing reduces friction compared with sleeve designs, helping keep acoustic output predictable during typical case airflow duty. No PWM curve or decibel rating is supplied, so exact noise levels at idle or load remain unspecified. Power consumption stays proportional to the rated current under steady voltage.
Sustained load behaviour
Continuous operation at speeds above 7000 RPM is supported by the dual ball bearing construction, which resists wear better than single bearing alternatives. The four-wire interface allows speed reporting and control if the motherboard header provides it, though no specific control protocol is documented. Without thermal throttling data or MTBF figures, long-term reliability under maximum RPM cannot be quantified from the available specifications.
Points forts
- High airflow for compact builds with 60×38 mm frame
- Dual-ball bearing rated for >7000 RPM continuous operation
- 12 V 1.68 A draw keeps power budget predictable
- Four-wire PWM connector enables precise speed control
- Blue mounting bracket simplifies installation in tight spaces
Caractéristiques
| Brand | Zyvpee |
|---|---|
| Series | AFB0612EHE |
| Model | AFB0612EHE |
| Type | Case Fan |
| Bearing Type | 2 Ball |
| RPM | >7000 RPM |
| Power Connector | 4 wires |
| Color | Black |
| LED | Non-LED |
| Features | DC axial fan |
| Dimensions | 60*38mm |
Questions sur cet article
How do I install the 60*38mm fan using the blue bracket and 4-wire connector?
Mount the blue bracket to the chassis with four screws, then plug the 4-wire PWM connector into the motherboard fan header; the step often missed is routing the cable so it cannot foul the spinning blades at >7000 RPM.
What maintenance will the 2 ball bearing need over time?
The 2 ball bearing design requires no lubrication; if noise or vibration appears after extended running at 12V 1.68A, replace the entire AFB0612EHE unit rather than servicing the bearing.
What is the first limit reached when the fan runs continuously at >7000 RPM?
Sustained operation at >7000 RPM makes bearing wear the first limiting factor; acoustic noise and vibration rise before the 12V 1.68A motor hits thermal limits.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $US
0.0000105BTC
En stock