Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Black 50 by 10 millimetre case fan with maglev bearing and two-wire power connector

Zyvpee

Zyvpee KDE1205PFV2 50*10mm 12V 1.1W 2-Wire Maglev Case Fan

SKU CH-V9DN-2HYQY

Compact 50x10mm maglev case fan runs under 1600 RPM at 12V 1.1W for CPU cooling

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector2 Wires
  • ColorBlack
  • Maglev bearing reduces friction for quieter operation
  • 12 V 1.1 W draw keeps power use low
  • 50 × 10 mm frame fits tight CPU cooler mounts
  • Two-wire connector simplifies installation on standard headers
  • Sub-1600 RPM speed balances airflow and noise

Compact 50 mm Maglev CPU Cooler Fan

The Zyvpee KDE1205PFV2 is a 50 by 10 mm case fan built for CPU cooler compatibility. It runs on 12 V and draws 1.1 W through a two-wire power connector. The maglev bearing and non-LED black frame suit builders who need a small, quiet cooler fan.

Sustained Operation Below 1600 RPM

At full speed the fan stays under 1600 RPM, keeping airflow steady without the noise spikes of higher-speed models. The maglev bearing reduces friction over long sessions, so acoustic output remains consistent during extended workloads. Two-wire power delivers fixed voltage for predictable behaviour.

Two-Wire Fixed-Voltage Connector

The 2-wire header means speed is set by voltage alone, with no PWM signal for automatic curve control. Buyers who need motherboard-managed fan curves or 4-pin headers cannot use this model for dynamic cooling. It fits only systems that accept constant 12 V two-wire fans.

Points forts

  • Maglev bearing reduces friction for quieter operation
  • 12 V 1.1 W draw keeps power use low
  • 50 × 10 mm frame fits tight CPU cooler mounts
  • Two-wire connector simplifies installation on standard headers
  • Sub-1600 RPM speed balances airflow and noise

Caractéristiques

BrandZyvpee
SeriesKDE1205PFV2
ModelKDE1205PFV2
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
RPM<1600 RPM
Power Connector2 Wires
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions50*10MM

Questions sur cet article

How much power does the 12V 1.1W maglev fan draw when running continuously?

The fan is rated at 1.1W on a 12V supply, so it draws very little power during all-day use.

What connector does the 2-wire 50*10mm fan need on my motherboard or controller?

It uses a simple 2-wire power connector that plugs into a standard 12V fan header.

Will the 1600 RPM KDE1205PFV2 fit as a replacement on my existing 50mm CPU cooler?

Yes, the 50*10mm dimensions match common 5010 coolers and the maglev bearing suits continuous CPU cooling.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.