Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Black 80mm square case fan 25mm thick four-pin connector

Zyvpee

Zyvpee L80T12NS1A7-57 80mm 12V 0.38A 4 Pin case fan

SKU CH-VSR8-MZ16W

An 80 mm DC case fan with a 4‑pin connector, ball bearing and 12 V 0.38 A rating

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • Efficient cooling for compact cases with 80mm frame
  • Reliable long-life operation using ball-bearing design
  • Precise speed control via 4-pin PWM connector
  • Low power draw at 12V 0.38A rating
  • Clean aesthetic with black non-LED finish

Compact 80 mm case fan for tight builds

This 80 mm DC fan fits standard 80*25 mm mounting points in small-form-factor cases or as a targeted spot cooler. It runs on 12 V at 0.38 A and uses a four-pin connector for PWM speed control. The ball bearing and non-LED black frame suit builders who want reliable airflow without lighting.

Straightforward four-pin installation

Align the four-pin plug with the motherboard or fan-controller header and secure the fan with four screws through the 80 mm mounting holes. The ball bearing reduces the risk of sleeve-bearing wear, but the thin 25 mm profile leaves little clearance for cable routing in cramped chassis. Verify header polarity before powering on.

80*25 mm frame decides fit

The 80 mm diameter and 25 mm thickness are the only dimensions that determine whether this fan will mount in your case or heatsink. If your hardware calls for a different frame size or a three-pin connector, this model will not match.

Points forts

  • Efficient cooling for compact cases with 80mm frame
  • Reliable long-life operation using ball-bearing design
  • Precise speed control via 4-pin PWM connector
  • Low power draw at 12V 0.38A rating
  • Clean aesthetic with black non-LED finish

Caractéristiques

BrandZyvpee
SeriesL80T12NS1A7-57
ModelL80T12NS1A7-57
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesDC Case Fan
Dimensions80*25mm

Questions sur cet article

How can I confirm the L80T12NS1A7-57 is spinning correctly after installation?

Connect the 4-pin header to the motherboard, power on the system, then check the fan speed reading in BIOS or monitoring software; it should report a stable RPM for a 12V 0.38A DC fan.

What comes with the 80mm case fan and what must I source separately?

The box contains the Zyvpee L80T12NS1A7-57 fan unit only; mounting screws and any fan splitter or extension cables are not included and must be purchased separately.

Which version of the 8025 series should I choose for a standard 12V 4-pin header?

The L80T12NS1A7-57 model is the 12V 0.38A 4-wire variant designed for direct connection to a standard 4-pin PWM header on the motherboard.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.