Zyvpee
Zyvpee MGA5012XR-A10 12V 0.19A 2 Pin VGA Cooling Fan
A 12 V, 0.19 A two-pin VGA cooling fan with a 45 mm diameter for graphics card coolers
- TypeCPU Cooler Fan
- CompatibilityCPU Cooler
- Power Connector2 Pin
- ColorBlack
- LEDNon-LED
- Featuresvga fan
- 12 V 0.19 A draw keeps power use low
- 45 mm diameter fits tight VGA cooler slots
- 2-pin connector installs without extra adapters
- 39 mm square frame aligns with standard mounting holes
- non-LED black finish avoids unwanted case glow
Replacement VGA Cooling Fan
The Zyvpee MGA5012XR-A10 is a 12 V, 0.19 A two-pin fan designed for graphics card coolers. It fits builds that need a direct swap for a worn or noisy original unit. The non-LED black frame keeps the look neutral inside any case.
Upgrade From Stock Cooler Fan
This fan replaces a failed or loud factory cooler on compatible video cards. The jump is worth it when the original bearing whines, stalls or no longer spins at full speed. Buyers who need PWM control or a different connector layout cannot use this model.
45 mm Diameter Airflow Headroom
The 45 mm rotor moves enough air for typical mid-range GPU heatsinks under normal gaming loads. It runs out of headroom on high-TDP cards or heavily overclocked setups that demand higher static pressure. Dimensions are 39 mm square per the package data.
Points forts
- 12 V 0.19 A draw keeps power use low
- 45 mm diameter fits tight VGA cooler slots
- 2-pin connector installs without extra adapters
- 39 mm square frame aligns with standard mounting holes
- non-LED black finish avoids unwanted case glow
Caractéristiques
| Brand | Zyvpee |
|---|---|
| Series | MGA5012XR-A10 |
| Model | MGA5012XR-A10 |
| Type | CPU Cooler Fan |
| Compatibility | CPU Cooler |
| Power Connector | 2 Pin |
| Color | Black |
| LED | Non-LED |
| Features | vga fan |
| Dimensions | contact us |
| Package Contents | 39*39*39mm |
Questions sur cet article
What are the exact mounting dimensions for the 45 mm fan?
The fan measures 39 mm on each side according to the package specifications.
How do I connect the two-pin power cable to the graphics card header?
Align the two wires with the 2-pin VGA fan header and press the connector straight down until it seats firmly.
When should I plan to replace the 12 V 0.19 A motor?
Replace the fan if bearing noise appears or airflow drops enough to raise GPU temperatures under load.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



