NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
A-Tech
An 8 GB registered DDR4 module running at 2133 MHz with ECC and CL15 latency for server workloads
This 8GB DDR4 2133MHz ECC RDIMM module targets server and workstation administrators who need registered memory with error correction. The 2Rx8 organisation and CL15 latency suit platforms that require registered DIMMs for stable multi-module operation. It replaces specific Hynix part numbers in compatible systems.
The registered buffer reduces electrical load on the memory controller, allowing larger memory populations in supported servers. ECC circuitry detects and corrects single-bit errors to protect data integrity. Major-brand DRAM chips and 1.20V operation meet standard DDR4 voltage requirements for enterprise environments.
Installation follows standard 288-pin DIMM procedure: align the key notch, press firmly until the retention clips engage, and verify seating. Common issues include mixing registered and unbuffered modules, populating slots in an order the motherboard manual does not support, or using a platform that does not accept registered memory. Check system documentation before fitting.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module is built with major-brand chips tested to stringent quality standards and carries a lifetime warranty, so no scheduled chip replacement or reconfiguration is required.
Operating at the standard 1.20 V DDR4 voltage and CL15 latency, the registered buffer manages electrical load on the memory controller, keeping heat and bandwidth within the rated DDR4 2133 specification.
The stick draws 1.20 V with no moving parts, so it adds zero audible noise; the registered design and low-voltage DDR4 operation keep heat output minimal during sustained workloads.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?