HP HyperX FURY 16GB DDR4 2933 CL17 Black HX429C17FB/16
- 16GB
- DDR4 2933 (PC4 2340…
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
HP
8 GB DDR4 desktop DIMM running at 2933 MHz with CL17 timing and a black heat spreader
Capacity 8GB
This 8GB DDR4 DIMM runs at 2933 MHz with CL17 17-19-19 timing at 1.20V. It uses a 288-pin unbuffered layout and includes a black heat spreader. The single-rank 1Rx8 design is built from eight 1G x 8-bit FBGA components. It targets desktop builders who need a straightforward capacity boost for everyday workloads.
The integrated heat spreader dissipates heat from the eight FBGA components without requiring active cooling. Operating at the standard 1.20V DDR4 voltage keeps power draw low and eliminates the need for extra voltage headroom. With no moving parts the module adds zero acoustic noise to the system.
This module replaces an empty slot or a lower-capacity DDR4 stick in a four-slot desktop board. The jump is worthwhile when the platform supports DDR4-2933 and the user needs 8GB more usable memory for multitasking or heavier browser loads. Builders who need more storage or a second memory channel populated with a matched pair should look elsewhere.
| Brand | HyperX |
|---|---|
| Series | FURY |
| Model | HX429C17FB2/8 |
| Capacity | 8GB |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL17 |
| Timing | 17-19-19 |
| Voltage | 1.20V |
| Color | Black |
| Heat Spreader | Yes |
| Features | HyperX HX429C17FB2/8 is a 1G x 64-bit (8GB) DDR4-2933 CL17 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Each module has been tested to run at DDR4-2933 at a low latency timing of 17-19-19 at 1.2V. |
גרסאות נוספות של דגם זה
אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.
Align the notch on the module with the key in the motherboard slot, press straight down until both side clips click, and verify the module sits flush; the common mistake is seating only one side so the opposite clip stays open.
No scheduled maintenance is required; keep the heat spreader dust-free with occasional compressed air and replace the module only if memory errors appear or a capacity upgrade is desired.
The JEDEC-standard 1.20 V operating voltage and CL17-19-19 timings define the stable envelope; sustained loads will hit the rated frequency and latency ceiling before any thermal throttle occurs.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?