אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Black 120 mm square case fan, ultra-thin 15 mm profile with ARGB lighting

JONSBO

JONSBO HF1215 Performance ARGB 15 mm Thin Case Fan Black

SKU CH-MGDN-G5K0P

A 120 mm case fan with a 15 mm profile, PWM speed control from 700 to 1800 rpm, airflow of 13.1 to 62 CFM, noise of 18.6 to 29.7 dBA.

  • Fan Counts1 Fan
  • TypeCase Fan
  • CompatibilityCase
  • Fan Thickness15mm
  • Bearing TypeDynamic Hydraulic Bearing
  • RPM700 - 1800rpm
  • Ultra-thin 15 mm profile fits tight builds
  • Addressable RGB syncs with 5 V motherboard headers
  • PWM speed range 700 – 1800 rpm delivers up to 62 CFM airflow
  • FDB dynamic hydraulic bearing rated 50 000 h MTTF for long life
  • Nine sickle blades plus eight rubber pads cut vibration to 18.6 – 29.7 dBA

Ultra-Thin 15 mm Profile

The JONSBO HF1215 is a 120 mm case fan measuring just 15 mm thick, designed for builds where standard 25 mm fans cannot fit. Its slim frame suits compact chassis, radiator push-pull setups, or tight clearances around motherboard heatsinks. The fan uses a Dynamic Hydraulic Bearing rated for 50000 hours MTTF at 25 °C and ships with eight rubber cushioning pads to decouple vibration from the case.

Upgrade From Standard Thickness

This fan replaces a conventional 25 mm model when space behind the motherboard tray or between components is limited. The thinner profile allows installation in narrow radiator stacks or shallow cases without sacrificing a 120 mm mounting pattern. The performance gain is worthwhile when a thicker fan would physically foul cables, a pump top, or a large CPU cooler base, letting the builder keep full 120 mm airflow in a constrained volume.

PWM and 5 V ARGB Limits

Speed is regulated by a 4-pin PWM signal across a 700 to 1800 rpm range, delivering 13.1 to 62 CFM at 18.6 to 29.7 dBA. The addressable RGB lighting requires a motherboard 5 V 3-pin header; it will not function on 12 V RGB or non-addressable headers. Maximum airflow and static pressure are bounded by the 15 mm blade depth, so the fan suits moderate cooling loads rather than high-restriction radiators demanding peak static pressure.

נקודות עיקריות

  • Ultra-thin 15 mm profile fits tight builds
  • Addressable RGB syncs with 5 V motherboard headers
  • PWM speed range 700 – 1800 rpm delivers up to 62 CFM airflow
  • FDB dynamic hydraulic bearing rated 50 000 h MTTF for long life
  • Nine sickle blades plus eight rubber pads cut vibration to 18.6 – 29.7 dBA

מפרט טכני

BrandJONSBO
SeriesPerformance ARGB 15 mm Thin Light Fan
ModelHF1215
Fan Counts1 Fan
TypeCase Fan
CompatibilityCase
Fan Thickness15mm
Bearing TypeDynamic Hydraulic Bearing
RPM700 - 1800rpm
Air Flow13.1 - 62CFM
Noise Level18.6 -29.7dBA
Power Connector4 Pin
ColorBlack
LEDAddressable RGB
FeaturesPerformance ARGB 15 mm Thin Light Fan, FDB Dynamic Hydraulic Bearing,Shock Absorption and Low Noise Intelligent Control of Motor Speed,High Wind Pressure Fan Blade,
Dimensions120mm(L)*120mm(W)*15mm(H)

שאלות על הפריט הזה

Will the 15 mm thickness fit my 120 mm fan mount?

Yes, the fan is 120 mm square and only 15 mm thick, so it fits any standard 120 mm mounting points that have at least 15 mm clearance.

How do I connect the 4-pin PWM and 3-pin ARGB cables correctly?

Plug the 4-pin connector into a motherboard PWM fan header for speed control and the 3-pin connector into a 5 V addressable RGB header for lighting sync.

When should I expect to replace the FDB bearing?

The bearing is rated for 50000 hours MTTF at 25 °C, which typically means several years of continuous use before replacement is needed.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.