OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
Kingston Technology Corp.
32 GB dual-channel DDR5 kit at 5600 MT/s with CL36 timing, 1.25 V operation, Intel XMP 3.0 and AMD EXPO support, and a black heat spreader
This dual-channel kit delivers 32 GB of DDR5 memory rated at 5600 MT/s with CL36 latency. Each 288-pin DIMM operates at 1.25 V and includes a black heat spreader. The modules support Intel XMP 3.0 and AMD EXPO profiles for automatic overclocking. They are built for desktop platforms that accept DDR5 memory.
Builders who want a ready-tuned 32 GB kit with factory profiles for both major CPU platforms will benefit. Systems limited to 1.1 V JEDEC operation without XMP or EXPO support will not reach the rated 5600 speed. Buyers needing ECC or registered modules should look elsewhere.
The decisive specification is the 5600 MT/s data rate combined with 36-38-38-74 timings at 1.25 V. This speed and latency pair determines whether the kit matches the motherboard’s supported memory profile and the builder’s performance target.
| Brand | Kingston |
|---|---|
| Series | FURY Beast |
| Model | KF560C36BBEK2-32 |
| Capacity | 32GB |
| Type | 288-Pin PC RAM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL36 |
| Timing | 36-38-38-74 |
| Voltage | 1.25V |
| ECC | No |
| Buffered/Registered | Unbuffered / Unregistered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 and AMD EXPO |
| Color | Black |
| Heat Spreader | Yes |
| Features | Kingston FURY KF556C36BBE-32 is a 4G x 64-bit (32GB) DDR5-5600 CL36 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 2G x 8-bit FBGA components per module. The module supports AMD® EXPO v1.0 and Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Each module has been tested to run at DDR5-5600 at a low latency timing of 36-38-38 at 1.25V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers. |
| Recommend Use | AMD & Intel Compatible / AMD 500 Series / AMD 600 Series / AMD B550 / AMD B650 / AMD Ryzen Compatible / AMD X570 / AMD X670 / High Performance or Gaming Memory / Intel 500 Series / Intel 600 Series / Intel 700 Series / Intel B660 / Intel B670 / Intel Compatible / Intel Z590 / Intel Z690 / Intel Z790 |
| LED Color | None |
| משקל משלוח | 0.09 kg |
| מידות האריזה | 171 × 57 × 19 mm |
The SPD is programmed to JEDEC standard DDR5-4800 at 1.1V with timings of 40-39-39.
The black aluminium heat spreader adds roughly 44 mm height; check your cooler's RAM clearance spec to confirm fit.
Install the two modules in the same-colour slots (usually A2 and B2), then enable Intel XMP 3.0 or AMD EXPO in the BIOS to apply the 5600 profile.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?