אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Small green circuit board with a 1.69 inch colour LCD screen and pin headers

LORDWORLD

LORDWORLD ESP32-S3 1.69inch LCD Development Board 240×280 65K Color Accelerometer Gyroscope

SKU CH-FMDG-V6D66

ESP32-S3 development board with 1.69 inch IPS LCD at 240×280 resolution and 65K colour, plus accelerometer, gyroscope, Wi-Fi and Bluetooth 5

  • Sharp visuals from a 1.69 inch IPS panel at 240×280
  • 65K colour depth driven by the ST7789V2 display driver
  • Motion-aware projects enabled by onboard accelerometer and gyroscope
  • Reliable wireless links via 2.4 GHz Wi-Fi 802.11 b/g/n and Bluetooth 5 LE
  • Compact ESP32-S3 board ready for diverse IoT edge applications

Compact IoT Board with Integrated Display

The LORDWORLD ESP32-S3 development board combines a microcontroller, a 1.69inch IPS LCD and motion sensors in a single module. It targets makers building portable interfaces, sensor nodes or wearable prototypes that need on-board visual feedback.

Solder-Free Start with SPI Wiring

The board arrives fully assembled so no component soldering is required; connect power and programme the ESP32-S3 via USB. The ST7789V2 driver uses SPI communication, so verify pin mapping in your framework before writing display code.

240×280 65K Colour Panel Decides Fit

The onboard screen fixes the visual workspace at 240 by 280 pixels with 65K colour depth. Projects needing higher resolution, larger diagonals or monochrome e-paper must choose a different module.

נקודות עיקריות

  • Sharp visuals from a 1.69 inch IPS panel at 240×280
  • 65K colour depth driven by the ST7789V2 display driver
  • Motion-aware projects enabled by onboard accelerometer and gyroscope
  • Reliable wireless links via 2.4 GHz Wi-Fi 802.11 b/g/n and Bluetooth 5 LE
  • Compact ESP32-S3 board ready for diverse IoT edge applications

מפרט טכני

BrandLORDWORLD

שאלות על הפריט הזה

How can I verify the ESP32-S3 board's 1.69inch IPS LCD is working correctly after powering it up?

The display should show a 240×280 resolution image in 65K colour driven by the onboard ST7789V2 driver over SPI; a simple test sketch that fills the screen with solid colours confirms the panel and driver are functioning.

What accessories are included with the LORDWORLD ESP32-S3-LCD-1.69 and what must I source separately?

The board ships with the ESP32-S3 module, 1.69inch LCD, accelerometer and gyroscope already soldered; you only need to provide a USB-C cable for power and programming.

Which wireless capability should I choose between the 2.4 GHz Wi-Fi 802.11 B/G/N and Bluetooth 5 LE for low-power sensor logging?

Bluetooth 5 LE is designed for low-energy periodic transfers from the accelerometer and gyroscope, while 2.4 GHz Wi-Fi suits higher-throughput streaming; pick LE for battery-powered logging.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.