SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501664BTC
재고 있음
LORDWORLD
LORDWORLD ESP32-S3 1.69inch LCD Development Board 240×280 65K Color Accelerometer Gyroscope
ESP32-S3 development board with 1.69 inch IPS LCD at 240×280 resolution and 65K colour, plus accelerometer, gyroscope, Wi-Fi and Bluetooth 5
- Sharp visuals from a 1.69 inch IPS panel at 240×280
- 65K colour depth driven by the ST7789V2 display driver
- Motion-aware projects enabled by onboard accelerometer and gyroscope
- Reliable wireless links via 2.4 GHz Wi-Fi 802.11 b/g/n and Bluetooth 5 LE
- Compact ESP32-S3 board ready for diverse IoT edge applications
Compact IoT Board with Integrated Display
The LORDWORLD ESP32-S3 development board combines a microcontroller, a 1.69inch IPS LCD and motion sensors in a single module. It targets makers building portable interfaces, sensor nodes or wearable prototypes that need on-board visual feedback.
Solder-Free Start with SPI Wiring
The board arrives fully assembled so no component soldering is required; connect power and programme the ESP32-S3 via USB. The ST7789V2 driver uses SPI communication, so verify pin mapping in your framework before writing display code.
240×280 65K Colour Panel Decides Fit
The onboard screen fixes the visual workspace at 240 by 280 pixels with 65K colour depth. Projects needing higher resolution, larger diagonals or monochrome e-paper must choose a different module.
주요 특징
- Sharp visuals from a 1.69 inch IPS panel at 240×280
- 65K colour depth driven by the ST7789V2 display driver
- Motion-aware projects enabled by onboard accelerometer and gyroscope
- Reliable wireless links via 2.4 GHz Wi-Fi 802.11 b/g/n and Bluetooth 5 LE
- Compact ESP32-S3 board ready for diverse IoT edge applications
사양
| Brand | LORDWORLD |
|---|
이 상품에 대한 질문
How can I verify the ESP32-S3 board's 1.69inch IPS LCD is working correctly after powering it up?
The display should show a 240×280 resolution image in 65K colour driven by the onboard ST7789V2 driver over SPI; a simple test sketch that fills the screen with solid colours confirms the panel and driver are functioning.
What accessories are included with the LORDWORLD ESP32-S3-LCD-1.69 and what must I source separately?
The board ships with the ESP32-S3 module, 1.69inch LCD, accelerometer and gyroscope already soldered; you only need to provide a USB-C cable for power and programming.
Which wireless capability should I choose between the 2.4 GHz Wi-Fi 802.11 B/G/N and Bluetooth 5 LE for low-power sensor logging?
Bluetooth 5 LE is designed for low-energy periodic transfers from the accelerometer and gyroscope, while 2.4 GHz Wi-Fi suits higher-throughput streaming; pick LE for battery-powered logging.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
