Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Small green circuit board with a 1.69 inch colour LCD screen and pin headers

LORDWORLD

LORDWORLD ESP32-S3 1.69inch LCD Development Board 240×280 65K Color Accelerometer Gyroscope

SKU CH-FMDG-V6D66

ESP32-S3 development board with 1.69 inch IPS LCD at 240×280 resolution and 65K colour, plus accelerometer, gyroscope, Wi-Fi and Bluetooth 5

  • Sharp visuals from a 1.69 inch IPS panel at 240×280
  • 65K colour depth driven by the ST7789V2 display driver
  • Motion-aware projects enabled by onboard accelerometer and gyroscope
  • Reliable wireless links via 2.4 GHz Wi-Fi 802.11 b/g/n and Bluetooth 5 LE
  • Compact ESP32-S3 board ready for diverse IoT edge applications

Compact IoT Board with Integrated Display

The LORDWORLD ESP32-S3 development board combines a microcontroller, a 1.69inch IPS LCD and motion sensors in a single module. It targets makers building portable interfaces, sensor nodes or wearable prototypes that need on-board visual feedback.

Solder-Free Start with SPI Wiring

The board arrives fully assembled so no component soldering is required; connect power and programme the ESP32-S3 via USB. The ST7789V2 driver uses SPI communication, so verify pin mapping in your framework before writing display code.

240×280 65K Colour Panel Decides Fit

The onboard screen fixes the visual workspace at 240 by 280 pixels with 65K colour depth. Projects needing higher resolution, larger diagonals or monochrome e-paper must choose a different module.

Přednosti

  • Sharp visuals from a 1.69 inch IPS panel at 240×280
  • 65K colour depth driven by the ST7789V2 display driver
  • Motion-aware projects enabled by onboard accelerometer and gyroscope
  • Reliable wireless links via 2.4 GHz Wi-Fi 802.11 b/g/n and Bluetooth 5 LE
  • Compact ESP32-S3 board ready for diverse IoT edge applications

Specifikace

BrandLORDWORLD

Otázky k tomuto produktu

How can I verify the ESP32-S3 board's 1.69inch IPS LCD is working correctly after powering it up?

The display should show a 240×280 resolution image in 65K colour driven by the onboard ST7789V2 driver over SPI; a simple test sketch that fills the screen with solid colours confirms the panel and driver are functioning.

What accessories are included with the LORDWORLD ESP32-S3-LCD-1.69 and what must I source separately?

The board ships with the ESP32-S3 module, 1.69inch LCD, accelerometer and gyroscope already soldered; you only need to provide a USB-C cable for power and programming.

Which wireless capability should I choose between the 2.4 GHz Wi-Fi 802.11 B/G/N and Bluetooth 5 LE for low-power sensor logging?

Bluetooth 5 LE is designed for low-energy periodic transfers from the accelerometer and gyroscope, while 2.4 GHz Wi-Fi suits higher-throughput streaming; pick LE for battery-powered logging.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.