SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391.99 $
0.00501644BTC
במלאי
NEMIX RAM
NEMIX RAM 8GB DDR4 3200 ECC RDIMM Gigabyte MZ31-AR0 EPYC memory upgrade
8GB DDR4 3200 ECC registered DIMM validated for Gigabyte MZ31-AR0 EPYC motherboards
- Capacity8GB
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection guards data integrity in servers
- Registered design stabilises signal for EPYC platforms
- 3200 MHz DDR4 speed matches board spec
- 2 V operation keeps power draw low
- 288-pin RDIMM form factor fits MZ31-AR0
Compatible EPYC Server Memory
This NEMIX RAM module is an 8 GB DDR4 3200 ECC RDIMM built for the Gigabyte MZ31-AR0 motherboard. It runs at 1.20 V with CL22 latency and uses a registered 1Rx8 layout on a 288-pin PCB. The part number is MR25600-818K1.
Suited for registered ECC slots only
The stick fits servers and workstations that require registered ECC DDR4 memory on the specified Gigabyte platform. It will not work in systems that accept only unbuffered non-ECC modules or that use a different DDR generation.
Single 8 GB module headroom
One module adds 8 GB of registered ECC capacity at 3200 MT/s for typical server workloads. Larger memory configurations need additional identical RDIMMs to scale beyond this single module.
נקודות עיקריות
- ECC protection guards data integrity in servers
- Registered design stabilises signal for EPYC platforms
- 3200 MHz DDR4 speed matches board spec
- 2 V operation keeps power draw low
- 288-pin RDIMM form factor fits MZ31-AR0
מפרט טכני
| Brand | NEMIX RAM |
|---|---|
| Series | Gigabyte Server Motherboard Compatible Series Memory |
| Model | Gigabyte DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-818K1 |
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Gigabyte |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 1Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory |
שאלות על הפריט הזה
What motherboard must already be installed for this MR25600-818K1 registered DIMM to function?
This module is validated for the Gigabyte MZ31-AR0 motherboard designed for AMD EPYC processors, so that board must be present.
Can this CL22 1Rx8 registered DIMM share a channel with older DDR4 registered modules already in the server?
Mixing speeds or ranks on the same channel is not recommended; the motherboard will clock all modules to the slowest common speed and may disable ECC if configurations differ.
How can I confirm the module is running at PC4-25600 with ECC active after installation?
Enter the BIOS or use a hardware information utility to verify the memory speed reads 3200 MT/s and that ECC status shows enabled for the installed DIMM.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
