我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green DDR4 ECC RDIMM module, eight chips, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 ECC RDIMM Gigabyte MZ31-AR0 EPYC memory upgrade

SKU CH-ZA1G-FGG15

8GB DDR4 3200 ECC registered DIMM validated for Gigabyte MZ31-AR0 EPYC motherboards

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection guards data integrity in servers
  • Registered design stabilises signal for EPYC platforms
  • 3200 MHz DDR4 speed matches board spec
  • 2 V operation keeps power draw low
  • 288-pin RDIMM form factor fits MZ31-AR0

Compatible EPYC Server Memory

This NEMIX RAM module is an 8 GB DDR4 3200 ECC RDIMM built for the Gigabyte MZ31-AR0 motherboard. It runs at 1.20 V with CL22 latency and uses a registered 1Rx8 layout on a 288-pin PCB. The part number is MR25600-818K1.

Suited for registered ECC slots only

The stick fits servers and workstations that require registered ECC DDR4 memory on the specified Gigabyte platform. It will not work in systems that accept only unbuffered non-ECC modules or that use a different DDR generation.

Single 8 GB module headroom

One module adds 8 GB of registered ECC capacity at 3200 MT/s for typical server workloads. Larger memory configurations need additional identical RDIMMs to scale beyond this single module.

商品特色

  • ECC protection guards data integrity in servers
  • Registered design stabilises signal for EPYC platforms
  • 3200 MHz DDR4 speed matches board spec
  • 2 V operation keeps power draw low
  • 288-pin RDIMM form factor fits MZ31-AR0

商品規格

BrandNEMIX RAM
SeriesGigabyte Server Motherboard Compatible Series Memory
ModelGigabyte DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-818K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemGigabyte
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

商品問答

What motherboard must already be installed for this MR25600-818K1 registered DIMM to function?

This module is validated for the Gigabyte MZ31-AR0 motherboard designed for AMD EPYC processors, so that board must be present.

Can this CL22 1Rx8 registered DIMM share a channel with older DDR4 registered modules already in the server?

Mixing speeds or ranks on the same channel is not recommended; the motherboard will clock all modules to the slowest common speed and may disable ECC if configurations differ.

How can I confirm the module is running at PC4-25600 with ECC active after installation?

Enter the BIOS or use a hardware information utility to verify the memory speed reads 3200 MT/s and that ECC status shows enabled for the installed DIMM.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。