Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green DDR4 ECC RDIMM module, eight chips, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 ECC RDIMM Gigabyte MZ31-AR0 EPYC memory upgrade

SKU CH-ZA1G-FGG15

8GB DDR4 3200 ECC registered DIMM validated for Gigabyte MZ31-AR0 EPYC motherboards

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection guards data integrity in servers
  • Registered design stabilises signal for EPYC platforms
  • 3200 MHz DDR4 speed matches board spec
  • 2 V operation keeps power draw low
  • 288-pin RDIMM form factor fits MZ31-AR0

Compatible EPYC Server Memory

This NEMIX RAM module is an 8 GB DDR4 3200 ECC RDIMM built for the Gigabyte MZ31-AR0 motherboard. It runs at 1.20 V with CL22 latency and uses a registered 1Rx8 layout on a 288-pin PCB. The part number is MR25600-818K1.

Suited for registered ECC slots only

The stick fits servers and workstations that require registered ECC DDR4 memory on the specified Gigabyte platform. It will not work in systems that accept only unbuffered non-ECC modules or that use a different DDR generation.

Single 8 GB module headroom

One module adds 8 GB of registered ECC capacity at 3200 MT/s for typical server workloads. Larger memory configurations need additional identical RDIMMs to scale beyond this single module.

Pluspunten

  • ECC protection guards data integrity in servers
  • Registered design stabilises signal for EPYC platforms
  • 3200 MHz DDR4 speed matches board spec
  • 2 V operation keeps power draw low
  • 288-pin RDIMM form factor fits MZ31-AR0

Specificaties

BrandNEMIX RAM
SeriesGigabyte Server Motherboard Compatible Series Memory
ModelGigabyte DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-818K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemGigabyte
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

Vragen over dit artikel

What motherboard must already be installed for this MR25600-818K1 registered DIMM to function?

This module is validated for the Gigabyte MZ31-AR0 motherboard designed for AMD EPYC processors, so that board must be present.

Can this CL22 1Rx8 registered DIMM share a channel with older DDR4 registered modules already in the server?

Mixing speeds or ranks on the same channel is not recommended; the motherboard will clock all modules to the slowest common speed and may disable ECC if configurations differ.

How can I confirm the module is running at PC4-25600 with ECC active after installation?

Enter the BIOS or use a hardware information utility to verify the memory speed reads 3200 MT/s and that ECC status shows enabled for the installed DIMM.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.