OWC 8GB DDR4 2133 CL15 1.2V UDIMM memory upgrade for HP Envy Phoenix 860
- 8GB
- 288-Pin DDR4 Non-EC…
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
OWC
8GB DDR4 2133 CL15 SODIMM module built for NCR RealPOS XR7 Plus POS (7703) systems
This 8 GB DDR4 SODIMM is built for the NCR RealPOS XR7 Plus POS (7703). It delivers a single-module capacity increase for point-of-sale terminals that require 260-pin PC4-17000 memory. The unbuffered non-ECC design matches the original system specification exactly. Buyers needing ECC protection or registered modules cannot use this part.
Operating at 1.2 V, the module draws minimal power and generates little heat during continuous retail operation. No heat spreader is fitted, relying on the chassis airflow of the POS unit. The CL15 latency at 2133 MHz keeps timing tight without raising voltage. Systems with restricted ventilation or high ambient temperatures should verify thermal headroom before installation.
JEDEC and RoHS compliance ensure the upgrade is warranty-safe for the host terminal. OWC provides a limited lifetime warranty with free technical support and an advanced replacement programme. A basic installation video is available to guide the DIY process. No additional software, drivers or accessories are bundled with the module.
| Brand | OWC |
|---|---|
| Part Number | 2S1D42R808GB |
| Capacity | 8GB |
| Type | 260-Pin DDR4 Non-ECC SODIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | NCR POS RealPOS XR7 Plus POS (7703) |
גרסאות נוספות של דגם זה
אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.
Power off the terminal and unplug it, then open the memory access panel. Align the notch on the 260-pin module with the slot key and press firmly until both side clips click. The step often missed is verifying the clips have fully locked on both sides.
No scheduled maintenance is required for the module itself. Keep the system vents clear of dust so the 1.2V SODIMM stays within its thermal limits. Replacement is only needed if a memory test reports errors or the terminal's workload outgrows the 8GB capacity.
The 8GB capacity ceiling is reached before the DDR4 2133 bandwidth or CL15 latency become bottlenecks. Once the terminal commits more than 8GB, the OS swaps to storage and responsiveness drops sharply.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
אף שפה לא תואמת.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?