OWC 8GB DDR4 2133 CL15 1.2V UDIMM memory upgrade for HP Envy Phoenix 860
- 8GB
- 288-Pin DDR4 Non-EC…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
OWC
8GB DDR4 2133 CL15 SODIMM module built for NCR RealPOS XR7 Plus POS (7703) systems
This 8 GB DDR4 SODIMM is built for the NCR RealPOS XR7 Plus POS (7703). It delivers a single-module capacity increase for point-of-sale terminals that require 260-pin PC4-17000 memory. The unbuffered non-ECC design matches the original system specification exactly. Buyers needing ECC protection or registered modules cannot use this part.
Operating at 1.2 V, the module draws minimal power and generates little heat during continuous retail operation. No heat spreader is fitted, relying on the chassis airflow of the POS unit. The CL15 latency at 2133 MHz keeps timing tight without raising voltage. Systems with restricted ventilation or high ambient temperatures should verify thermal headroom before installation.
JEDEC and RoHS compliance ensure the upgrade is warranty-safe for the host terminal. OWC provides a limited lifetime warranty with free technical support and an advanced replacement programme. A basic installation video is available to guide the DIY process. No additional software, drivers or accessories are bundled with the module.
| Brand | OWC |
|---|---|
| Part Number | 2S1D42R808GB |
| Capacity | 8GB |
| Type | 260-Pin DDR4 Non-ECC SODIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | NCR POS RealPOS XR7 Plus POS (7703) |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
Power off the terminal and unplug it, then open the memory access panel. Align the notch on the 260-pin module with the slot key and press firmly until both side clips click. The step often missed is verifying the clips have fully locked on both sides.
No scheduled maintenance is required for the module itself. Keep the system vents clear of dust so the 1.2V SODIMM stays within its thermal limits. Replacement is only needed if a memory test reports errors or the terminal's workload outgrows the 8GB capacity.
The 8GB capacity ceiling is reached before the DDR4 2133 bandwidth or CL15 latency become bottlenecks. Once the terminal commits more than 8GB, the OS swaps to storage and responsiveness drops sharply.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม