WaveShare SIM7600A-H 4G GNSS HAT for Raspberry Pi Jetson Nano

North American 4G HAT

The WaveShare SIM7600A-H HAT adds LTE Cat 4 connectivity and GNSS positioning to Raspberry Pi boards and the Jetson Nano. It supports downlink speeds up to 150 Mbps on LTE-FDD bands B2, B4 and B12, making it suitable for deployments across the US and Canada. The module mounts on the standard 40-pin GPIO header and operates at either 3.3 V or 5 V via an onboard jumper.

Build integration

A CP2102 USB-to-UART converter is onboard for serial debugging and AT command testing over USB. An audio jack and decoder enable voice calls, while the voltage translator lets the board match 3.3 V or 5 V logic without external level shifters. The 40-pin header passes through unused GPIOs so other HATs or sensors can still be stacked.

Target users

Makers and engineers building North American IoT gateways, asset trackers or remote-monitoring nodes that need cellular data and multi-constellation positioning in one add-on. Builders targeting European or Asian bands, or those requiring 5G throughput, should look at a different module.