BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00277883BTC
มีสินค้า
WaveShare
WaveShare SIM7600A-H 4G GNSS HAT for Raspberry Pi Jetson Nano
Adds 4G LTE CAT4 up to 150 Mbps and GNSS positioning to Raspberry Pi or Jetson Nano via 40-pin GPIO
- CPU TypeOther
- 4G connectivity up to 150Mbps downlink via LTE CAT4
- GNSS positioning with GPS, BeiDou, Glonass and LBS support
- Standard 40PIN GPIO header fits Raspberry Pi Zero to 4B and Jetson Nano
- Onboard CP2102 USB-UART converter plus audio jack for calls and debugging
- Switchable 3.3V or 5V logic voltage via onboard jumper
North American 4G HAT
The WaveShare SIM7600A-H HAT adds LTE Cat 4 connectivity and GNSS positioning to Raspberry Pi boards and the Jetson Nano. It supports downlink speeds up to 150 Mbps on LTE-FDD bands B2, B4 and B12, making it suitable for deployments across the US and Canada. The module mounts on the standard 40-pin GPIO header and operates at either 3.3 V or 5 V via an onboard jumper.
Build integration
A CP2102 USB-to-UART converter is onboard for serial debugging and AT command testing over USB. An audio jack and decoder enable voice calls, while the voltage translator lets the board match 3.3 V or 5 V logic without external level shifters. The 40-pin header passes through unused GPIOs so other HATs or sensors can still be stacked.
Target users
Makers and engineers building North American IoT gateways, asset trackers or remote-monitoring nodes that need cellular data and multi-constellation positioning in one add-on. Builders targeting European or Asian bands, or those requiring 5G throughput, should look at a different module.
จุดเด่น
- 4G connectivity up to 150Mbps downlink via LTE CAT4
- GNSS positioning with GPS, BeiDou, Glonass and LBS support
- Standard 40PIN GPIO header fits Raspberry Pi Zero to 4B and Jetson Nano
- Onboard CP2102 USB-UART converter plus audio jack for calls and debugging
- Switchable 3.3V or 5V logic voltage via onboard jumper
ข้อมูลจำเพาะ
| CPU Type | Other |
|---|
คำถามเกี่ยวกับสินค้านี้
What limits the sustained data speed on this HAT?
The SIM7600A-H module uses LTE CAT4, which caps downlink at 150 Mbps.
How much heat or noise does the board add when running continuously?
The HAT has no fan or active cooling; it draws power from the host's 40-pin header and runs silently.
Which host boards and SIM card size does this HAT require?
It fits any Raspberry Pi with a 40-pin GPIO header — Zero, 2B, 3B, 3B+, 4B — or a Jetson Nano, and takes a standard nano-SIM (not included).
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
