SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
XPG
1TB PCIe 3.0 x4 NVMe 1.3 M.2 2280 internal SSD with 3500/3000 MB/s sequential speeds, 390K/380K IOPS random performance, 640TB TBW, 2M-hour MTBF, and integrated heatsink
Options 1TB
גרסאות עם קו חוצה קיימות, אך אינן במלאי כאן.
The XPG SX8200 Pro is a 1TB internal SSD built on 3D NAND flash with a PCIe 3.0 x4 interface and NVMe 1.3 support. It targets PC enthusiasts, gamers and overclockers who need fast sequential and random performance for heavy workloads. The drive includes a heatsink and uses an SMI controller with SLC caching and a DRAM buffer to accelerate response times.
Moving from a SATA 6Gb/s SSD to this PCIe 3.0 x4 NVMe drive delivers peak sequential reads of 3500 MB/s and writes of 3000 MB/s, far exceeding the SATA bottleneck. The jump is worth it when workloads demand high 4K random performance up to 390,000 read and 380,000 write IOPS, or sustained throughput for multimedia editing and gaming. The 640 TBW rating and 2,000,000 hour MTBF back the upgrade for intensive use.
The PCIe 3.0 x4 interface caps maximum bandwidth, so sequential speeds cannot exceed the 3500/3000 MB/s ceiling even if the controller and NAND could go faster. Operating temperature is rated 0°C to 70°C; storage temperature spans -40°C to 85°C. Shock resistance is rated at 1500G for 0.5ms. LDPC error correction, end-to-end data protection and a RAID engine maintain data integrity within these physical constraints.
| Brand | XPG |
|---|---|
| Series | SX8200 Pro |
| Model | ASX8200PNP-1TT-C |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4, NVMe 1.3 |
| Controller | SMI |
| Max Sequential Read | ATTO: 3350 MB/s CDM: 3500 MB/s |
| Max Sequential Write | ATTO: 2800 MB/s CDM: 3000 MB/s |
| 4KB Random Read | Up to 390,000 IOPS |
| 4KB Random Write | Up to 380,000 IOPS |
| Terabytes Written (TBW) | 640TB |
| MTBF | 2,000,000 hours |
| HeatSink | with HeatSink |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G/0.5ms |
| Height | 0.640 |
| Width | 4.000 |
| Depth | 5.000 |
| Weight | 0.07 |
| משקל משלוח | 0.02 kg |
| מידות האריזה | 135 × 109 × 22 mm |
The drive fits a standard M.2 2280 slot with an M-key interface for PCIe 3.0 x4 NVMe 1.3 operation.
Insert the drive at an angle into the M.2 slot, press it flat, then secure it with the single retention screw; the step often missed is fastening that screw, which keeps the thermal pad in contact with the controller.
The drive is rated for 640 TBW; with typical consumer writes of 20–40 TB per year it should last well over a decade before wear-out becomes likely.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
אף שפה לא תואמת.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?